Key benefits

• Compact and lightweight construction
• Low maintenance costs
• Reduced noise and vibration during snow clearing
• Low load on the carrier vehicle
• Quick installation and easy operation

Compact snow plough for professional winter maintenance

The PG snow plough is a compact single-segment snow plough designed for efficient snow clearing on local roads, sidewalks, parking areas, yards and other smaller traffic surfaces. Thanks to its low weight and compact dimensions, it is an ideal solution for compact municipal vehicles, tractors and other utility machines where manoeuvrability and low vehicle load are essential.

Despite its compact and lightweight design, the PG snow plough provides reliable snow removal, a long service life and low maintenance costs, making it an excellent choice for both municipal contractors and private winter maintenance operators.

Single-segment construction

The compact single-segment design provides excellent visibility, low weight and easy manoeuvrability, even in confined areas. Its robust steel construction ensures a long service life and reliable performance during daily operation in demanding winter conditions.

Triple protection system

The proven triple protection system consists of oscillating links, support elements in the form of skids or caster wheels, and a hydraulic shock protection system. This design allows the plough to safely pass over obstacles, reduces stress on the carrier vehicle and minimises noise and vibration during operation.

Hydraulic control

The snow plough is hydraulically controlled via the carrier vehicle’s control lever. If required, it can also be equipped with its own electro-hydraulic system (EHS), allowing operation on vehicles without an integrated hydraulic system.

Mounting on vehicles and utility machines

Various mounting options are available for municipal vehicles, tractors and other utility machines. In addition to standard mounting plates and three-point linkage, the plough can be adapted to different carrier vehicles and machines, ensuring quick installation and removal.

Cutting edge options

The PG snow plough is supplied as standard with wear-resistant steel cutting edges. Rubber, polyurethane and combined cutting edges are also available for efficient snow clearing on sensitive surfaces such as granite, ceramic paving, concrete pavers and other decorative surfaces.

The post PG Snow plough appeared first on Riko Ribnica.

Key benefits

• Low weight and minimal load on the carrier vehicle
• Excellent manoeuvrability in confined areas
• Low maintenance costs
• Ideal for urban and municipal applications
• Quick installation and easy operation

Lightweight snow plough for professional winter maintenance

The PV snow plough is the lightest model in the RIKO Ribnica product range and is designed for efficient snow clearing on local roads, sidewalks, parking areas, yards and other urban traffic surfaces. Its low weight makes it an ideal solution for compact municipal vehicles, tractors and other utility machines where manoeuvrability, low vehicle load and ease of operation are essential.

The compact design ensures safe operation in narrow streets and confined spaces while providing reliable snow removal, a long service life and low maintenance costs.

Single-segment construction

The single-segment design provides excellent visibility, low weight and easy manoeuvrability, even in confined areas. Its robust steel construction ensures a long service life and reliable performance during daily operation in demanding winter conditions.

Triple protection system

The proven triple protection system consists of spring-loaded trip flaps, support elements in the form of skids or caster wheels, and a hydraulic shock protection system. This design allows the plough to safely pass over obstacles, reduces stress on the carrier vehicle and maintains continuous cutting edge contact with the road surface for efficient snow clearing.

Hydraulic control

The snow plough is hydraulically controlled via the carrier vehicle’s control lever. If required, it can also be equipped with its own electro-hydraulic system (EHS), allowing operation on vehicles without an integrated hydraulic system.

Mounting on vehicles and utility machines

Various mounting options are available for municipal vehicles, tractors and other utility machines. In addition to standard mounting plates and three-point linkage, the plough can be adapted to different carrier vehicles and machines, ensuring quick installation and removal.

Cutting edge options

The PV snow plough is supplied as standard with wear-resistant steel cutting edges. Rubber, polyurethane and combined cutting edges are also available for efficient snow clearing on sensitive surfaces such as granite, ceramic paving, concrete pavers and other decorative surfaces.

The post PV Snow plough appeared first on Riko Ribnica.

Key benefits

• Variable plough geometry
• Multiple operating modes
• Wide range of applications
• Excellent manoeuvrability in confined areas
• Low maintenance costs

Vario snow plough for professional winter maintenance

The SPV snow plough is a front-mounted Vario snow plough with variable geometry, designed for professional snow clearing on roads, streets, parking areas and other traffic surfaces. Thanks to its two independently controlled wings, it quickly adapts to changing operating conditions and delivers efficient snow removal, even in demanding environments.

It is particularly effective in city centres, narrow streets and parking areas, where its variable geometry provides multiple ploughing configurations and efficient operation in confined spaces.

Two-segment Vario construction

The SPV snow plough consists of two independently controlled mouldboards that can be operated separately or synchronously directly from the carrier vehicle cab. This design allows rapid adaptation to different operating conditions while ensuring excellent manoeuvrability, efficient snow clearing and safe transport.

Multiple ploughing modes

The variable geometry allows several different operating configurations:

• Straight position for standard snow clearing
• A position for the first snow clearing pass
• Y position for collecting and removing snow without side casting

Thanks to its versatile operating positions, the SPV snow plough is suitable for a wide range of winter maintenance applications and delivers efficient performance in various winter conditions.

Protection system

The proven protection system consists of spring-loaded trip flaps and support elements in the form of skids or caster wheels. The springs maintain continuous contact between the cutting edge and the road surface, while the cutting edges automatically return to the working position after passing an obstacle, ensuring efficient and high-quality snow clearing.

Hydraulic control

The snow plough is hydraulically controlled via the carrier vehicle’s control lever. If required, it can also be equipped with its own electro-hydraulic system (EHS), allowing operation on vehicles without an integrated hydraulic system.

Mounting on vehicles and utility machines

Various mounting options are available for municipal vehicles, tractors and other utility machines. In addition to standard mounting plates and three-point linkage, the plough can be adapted to different carrier vehicles and machines, ensuring quick installation and removal.

Cutting edge options

The SPV snow plough is supplied as standard with wear-resistant steel cutting edges. Rubber, polyurethane and combined cutting edges are also available for efficient snow clearing on sensitive surfaces such as granite, ceramic paving, concrete pavers and other decorative surfaces.

Video presentation

The post SPV Snow plough appeared first on Riko Ribnica.

Key benefits

• Professional segment snow plough
• Wide range of applications
• Reduced noise and vibration during snow clearing
• Long service life
• Low maintenance costs

Professional segment snow plough for demanding winter conditions

The SPG snow plough is a professional segment snow plough designed for efficient snow clearing on local and regional roads, expressways and motorways. It is available in three- or four-segment configurations, allowing it to be adapted to different operational requirements and working conditions. Its robust construction, wide range of configurations and reliable performance make it an excellent choice for municipal services, road maintenance companies and professional winter maintenance contractors.

Several versions are available, including different segment configurations, the DNO system for increased turning angle and side tilt adjustment, and the SPG Z version with one or two folding wings. Its modular design allows the plough to be tailored to different applications and customer requirements.

Segment construction

The segment construction ensures excellent ground following, smooth operation and outstanding snow clearing performance, even at higher operating speeds. The robust steel construction provides a long service life, high reliability and low maintenance costs, even under intensive professional use.

Triple protection system

The proven triple protection system consists of oscillating links, support elements in the form of skids or wheels, and a hydraulic shock protection system. The oscillating links allow the plough to safely pass over higher obstacles, reduce stress on the carrier vehicle and effectively minimise noise and vibration during operation.

Different plough configurations

The SPG snow plough is available in several configurations to suit different user requirements:

• Three- or four-segment configuration
• DNO system for increased turning angle and side tilt adjustment
• SPG Z version with one or two folding wings
• Wide range of optional equipment

Hydraulic control

The plough is hydraulically controlled via the carrier vehicle’s control lever. If required, it can also be equipped with its own electro-hydraulic system (EHS), enabling operation on vehicles without an integrated hydraulic system.

Mounting on vehicles and utility machines

Various mounting systems are available for installation on municipal vehicles, trucks and other utility machines. In addition to standard mounting plates and three-point linkage, the plough can be adapted to different carrier vehicles and utility machines, allowing quick installation and removal.

Selection of cutting edges for different surfaces

The SPG snow plough is supplied as standard with wear-resistant steel cutting edges. Rubber, polyurethane and combined cutting edges are also available for different surface types, ensuring efficient snow clearing on more sensitive surfaces such as granite, ceramic paving, block paving and other decorative finishes.

The post SPG Snow plough appeared first on Riko Ribnica.

Key benefits

• Designed for the toughest winter conditions
• Robust four-segment construction
• High operating speeds
• Proven triple protection system
• Long service life and low maintenance costs

Professional snow plough for the most demanding winter maintenance tasks

The RPS snow plough is a professional four-segment snow plough designed for clearing national roads, expressways, motorways and other major traffic routes where high performance, reliability and high operating speeds are essential. Thanks to its robust construction and many years of development, it provides a reliable solution for professional winter maintenance contractors, even in the most demanding winter conditions.

Several plough versions and a wide range of optional equipment are available, allowing the plough to be adapted to different applications and user requirements.

Four-segment construction

The robust four-segment construction ensures excellent ground following, even at high operating speeds. Its heavy-duty steel construction provides exceptional durability, a long service life and reliable performance, even under intensive professional use.

Triple protection system

The proven triple protection system is based on the connection between the plough segment and the main frame, combining preloaded springs, oscillating links, support elements in the form of skids or wheels, and a hydraulic shock protection system. The oscillating links allow the plough to pass safely over even very high obstacles, while the springs ensure constant contact between the cutting edge and the road surface. After passing an obstacle, the segment automatically returns to its working position, ensuring continuous and efficient snow clearing.

Different plough configurations

The RPS snow plough is available in several configurations to suit different user requirements:

• Four-segment configuration
• RPS DNO version for increased turning angle and side tilt adjustment
• RPS 5P version with an additional fifth segment
• Wide range of optional equipment

Hydraulic control

The plough is hydraulically controlled via the carrier vehicle’s control lever. If required, it can also be equipped with its own electro-hydraulic system (EHS), enabling operation on vehicles without an integrated hydraulic system.

Mounting on vehicles and utility machines

Various mounting systems are available for installation on municipal vehicles, trucks and other utility machines. In addition to standard mounting plates and three-point linkage, the plough can be adapted to different carrier vehicles and utility machines, allowing quick installation and removal.

Selection of cutting edges for different surfaces

The RPS snow plough is supplied as standard with wear-resistant steel cutting edges. Rubber, polyurethane and combined cutting edges are also available for different surface types, ensuring efficient snow clearing on more sensitive surfaces such as granite, ceramic paving, block paving and other decorative finishes.

The post RPS Snow plough appeared first on Riko Ribnica.

Key benefits

• Folding wing for increased working width
• High operating speeds
• Excellent efficiency on large areas
• Proven triple protection system
• Long service life and low maintenance costs

Professional snow plough for the largest areas

The RPS 5P snow plough is a professional multi-segment snow plough with a folding wing, designed for fast and efficient snow clearing on motorways, expressways and other large traffic areas. The additional folding wing increases the working width while reducing the transport width, allowing more efficient operation without transport restrictions.

Thanks to its robust construction, proven protection system and ability to operate at high speeds, the RPS 5P is the ideal solution for the most demanding winter maintenance operations. For maximum efficiency on motorways, we recommend using it in combination with the SPB side snow plough.

Multi-segment construction with folding wing

The robust multi-segment construction with an additional folding wing provides a greater working width during snow clearing while reducing the transport width during road travel. This design ensures high productivity, excellent ground following and reliable performance even under intensive professional use.

Triple protection system

The proven triple protection system is based on the connection between the plough segment and the main frame, combining preloaded springs, oscillating links, support elements in the form of skids or wheels, and a hydraulic shock protection system. The oscillating links allow the plough to pass safely over even very high obstacles, while the springs ensure constant contact between the cutting edge and the road surface. After passing an obstacle, the segment automatically returns to its working position, ensuring continuous and efficient snow clearing.

RPS 5P features

The RPS 5P snow plough is designed for maximum efficiency when clearing large areas:

• Additional hydraulic folding wing
• Increased plough working width
• Reduced transport width
• Recommended for use in combination with the SPB side snow plough

Hydraulic control

The plough is hydraulically controlled via the carrier vehicle’s control lever. If required, it can also be equipped with its own electro-hydraulic system (EHS), enabling operation on vehicles without an integrated hydraulic system.

Mounting on vehicles and utility machines

Various mounting systems are available for installation on municipal vehicles, trucks and other utility machines. In addition to standard mounting plates and three-point linkage, the plough can be adapted to different carrier vehicles and utility machines, allowing quick installation and removal.

Selection of cutting edges for different surfaces

The RPS 5P snow plough is supplied as standard with wear-resistant steel cutting edges. Rubber, polyurethane and combined cutting edges are also available for different surface types, ensuring efficient snow clearing on more sensitive surfaces such as granite, ceramic paving, block paving and other decorative finishes.

The post RPS 5P Snow plough appeared first on Riko Ribnica.

Key benefits

• Designed for airport surfaces
• High operating speeds
• Excellent snow throwing performance
• Robust and reliable construction
• Long service life and low maintenance costs

Professional airport snow plough for high-speed operation

The RPS VL snow plough is a professional airport snow plough specifically developed for fast and efficient snow clearing on runways, taxiways, aprons and other large airport surfaces. The specially designed segment geometry lifts and throws snow more efficiently, delivering outstanding performance even at high operating speeds.

Several plough versions and a wide range of optional equipment are available, allowing the plough to be tailored to the requirements of airport operators and professional winter maintenance contractors.

Optimised segment construction

The specially designed segments lift the snow higher, providing more efficient snow throwing and increased clearing performance on airport surfaces. The robust steel construction ensures a long service life, exceptional durability and reliable operation, even in the most demanding winter conditions.

Triple protection system

The proven triple protection system is based on the connection between the plough segment and the main frame, combining preloaded springs, oscillating links, support elements in the form of skids or wheels, and a hydraulic shock protection system. The oscillating links allow the plough to pass safely over even very high obstacles, while the springs ensure constant contact between the cutting edge and the surface. After passing an obstacle, the segment automatically returns to its working position, ensuring continuous and efficient snow clearing.

Available plough versions

The RPS VL snow plough is available in several versions to meet different operational requirements:

• RPS VL 2P version with hydraulic folding side wings
• DNO system for increased turning angle and side tilt adjustment
• Wide range of optional equipment

RPS VL 2P – version with folding side wings

The RPS VL 2P version is equipped with two hydraulic folding side wings that allow the working and transport widths to be adjusted. With the wings folded, the plough can safely pass through narrow areas and be transported between locations. When the wings are extended, the working width increases significantly, enabling even faster and more efficient snow clearing of large airport surfaces.

Hydraulic control

The plough is hydraulically controlled via the carrier vehicle’s control lever. If required, it can also be equipped with its own electro-hydraulic system (EHS), enabling operation on vehicles without an integrated hydraulic system.

Mounting on vehicles and utility machines

Various mounting systems are available for installation on airport vehicles, trucks and other utility machines. In addition to standard mounting plates and three-point linkage, the plough can be adapted to different carrier vehicles and utility machines, allowing quick installation and removal.

Selection of cutting edges for different surfaces

The RPS VL snow plough is supplied as standard with Vulkollan® polyurethane cutting edges, providing excellent wear resistance without damaging airport pavements. Cutting edges made from other materials are also available to meet specific customer requirements and different surface types.

The post RPS VL Snow plough appeared first on Riko Ribnica.

Key benefits

• Increases the working clearing width
• Clears two traffic lanes in a single pass
• Quick change between working and transport positions
• Robust and reliable construction
• Higher winter maintenance productivity

Side snow plough for maximum snow clearing efficiency

The SPB side snow plough is designed for professional snow clearing of motorways and other wide traffic surfaces. Mounted on the right-hand side of the carrier vehicle, it works together with the front snow plough to significantly increase the clearing width, allowing two traffic lanes to be cleared in a single pass.

This configuration considerably increases winter maintenance efficiency, reduces clearing time and minimises the number of passes required. For maximum performance, we recommend using it in combination with the RPS 5P front snow plough.

Compact design for safe transport

The SPB is a hydraulically operated side snow plough with lifting, lowering, wing opening and wing folding functions. During transport, the plough folds alongside the vehicle, allowing safe passage through toll stations, underpasses, narrow sections and other road infrastructure without additional adjustments.

Protection system

The protection system is based on spring-loaded trip flaps and supporting elements in the form of skids or wheels. The springs ensure constant contact between the cutting edge and the road surface, while the trip flaps allow the plough to safely pass over obstacles. After passing an obstacle, the cutting edges automatically return to their working position, ensuring continuous and high-quality snow clearing.

Increase snow clearing efficiency

The SPB side snow plough significantly increases the working width without increasing the number of vehicles or passes. Together with the front plough, it efficiently clears two traffic lanes simultaneously, resulting in:

• higher productivity,
• shorter clearing times,
• fewer passes,
• lower fuel consumption,
• improved road safety.

Hydraulic control

The plough is hydraulically controlled via the carrier vehicle’s control lever. If required, it can also be equipped with its own electro-hydraulic system (EHS), enabling operation on vehicles without an integrated hydraulic system.

Mounting on vehicles

The SPB is mounted on the right-hand side of the vehicle using a specially designed side mounting plate. The mounting system ensures reliable load transfer to the vehicle chassis while allowing quick installation and removal of the plough.

Selection of cutting edges for different surfaces

The SPB snow plough is supplied as standard with wear-resistant steel cutting edges. Rubber, polyurethane and combined cutting edges are also available for different surface types, ensuring efficient snow clearing on more sensitive pavements.

The post SPB Snow plough appeared first on Riko Ribnica.

• Powder-coated
• Lightweight design
• Quick assembly and disassembly

SnowStriker snow ploughs for UTVs

SnowStriker UTV snow plough is an excellent choice for UTV vehicles. These snow ploughs are specially designed to be compatible with most popular UTV brands, including John Deere Gator, Polaris Ranger, Kioti K9, Kubota RTV, CF Moto, Can-am, and others. They are available in two different types – straight plough and variable plough – with various sizes that allow for customization according to specific needs.

SnowStriker snow ploughs are made of high-strength steel, powder-coated for additional protection and a long lifespan. Despite their durability, they are very lightweight, contributing to optimal use on UTV vehicles. Operating the plough is easy, as it is done through a specially installed control lever in the vehicle cabin. The 12-volt UTV vehicle battery is used to power the electro-hydraulic unit attached to the snow plough.

SnowStriker snow ploughs for UTVs are a reliable and efficient tool for snow removal, allowing for easy adjustment and effective operation on various terrains. Regardless of the brand of your UTV, SnowStriker snow ploughs will ensure that you are ready to tackle all the challenges that the winter season brings.

Winter service equipment for UTV vehicles

For UTV vehicles we recommend electric salt spreaders IceStriker UTV, which are specially designed for easy installation on UTVs and ensure precise and even distribution of spreading material.

The combination of the SnowStriker UTV snow plough and the IceStriker UTV spreader provides efficient, reliable and professional winter maintenance even on narrow roads, city streets and sidewalks.

The post SnowStriker UTV Snow plough appeared first on Riko Ribnica.

Main Advantages

• Powder-coated
• Lightweight design
• Quick installation and removal

SnowStriker snow ploughs are designed for passenger vehicles and manufactured in Europe. The quick-mount system allows easy installation and removal, and they are compatible with most pickups and SUVs on the market. SnowStriker plows are powder-coated and made from high-strength steel, ensuring durability while remaining lightweight. The plow is operated via a control lever mounted inside the vehicle cabin and an electro-hydraulic unit powered by the vehicle’s 12V or 24V battery (depending on the plow model).

SnowStriker SP and VP Snow Plows for Pickup Vehicles

Two types of snow plows in different sizes are available for pickup vehicles. The SnowStriker SP is a straight blade plow, while the SnowStriker VP is a variable (V) plow.

SnowStriker SML Snow Plows for Trucks

The SnowStriker SML series snow plows are designed for light trucks and municipal vehicles. As the widest snow plow in the Hilltip product range, with the same exceptional features as other SnowStriker models, it will elevate productivity to a whole new level during winter operations.

Also check out the electric salt spreaders IceStriker for pickups and light commercial vehicles.

The post SnowStriker Snow plough appeared first on Riko Ribnica.

The SnowStriker ML snow plough is designed for efficient snow removal on roads, parking areas, industrial surfaces and municipal infrastructure. Hilltip SnowStriker ploughs are specifically developed for light trucks and provide high ploughing productivity with easy vehicle mounting.

The solution is suitable for municipal companies, road maintenance contractors, industrial areas and logistics centres where fast and reliable snow removal is required.

Advantages of the snow plough for light trucks

• Powder-coated construction for long service life
• Robust design made from high-strength steel
• Quick mounting and dismounting on the vehicle
• Electro-hydraulic control from the vehicle cabin
• Large working width for efficient snow clearing

The SnowStriker ML snow plough is designed for professional use by municipal companies, winter service contractors and road infrastructure operators. It is manufactured in Europe and designed to operate in demanding winter conditions.

The mounting plate allows quick installation of the plough on the vehicle without complex modifications. The electro-hydraulic unit is mounted on the plough and powered directly from the vehicle battery with 12 or 24 V voltage.

SnowStriker ML snow plough models

The SnowStriker ML series for light trucks includes two models:

• SnowStriker SML – straight snow plough with a large working width for efficient snow clearing of larger areas
• SnowStriker VML – variable snow plough that, due to its geometry, allows multiple ploughing modes and is therefore suitable for parking areas, parks and city centres

The SnowStriker ML snow plough enables fast and efficient snow clearing on larger surfaces such as city roads, industrial yards, logistics centres and large parking areas. Thanks to its robust construction, it is suitable for intensive use in municipal services and road maintenance.

The large working width allows quick clearing of large areas, increasing productivity and reducing the time required for winter maintenance operations.

SnowStriker snow plough video presentation

Winter maintenance equipment for light trucks

The SnowStriker snow plough combined with a spreader provides an efficient solution for winter road maintenance. With one vehicle, you can perform both ploughing and spreading simultaneously, significantly increasing efficiency on roads, parking areas and industrial surfaces.

For light trucks, we recommend using electric salt spreaders IceStriker, which are designed for professional use in winter conditions. The spreaders allow precise dosing of spreading material, even distribution and easy control from the vehicle cabin.

The combination of the SnowStriker ML snow plough and the IceStriker spreader provides an efficient and reliable solution for winter maintenance on city roads, parking areas, industrial yards and logistics surfaces.

The post SnowStriker ML Snow plough appeared first on Riko Ribnica.