Our team develops vehicle upgrades for attachments and municipal vehicle upgrades that enable the safe and efficient use of snow ploughs, spreaders, sweepers, telescopic mowers and other municipal attachments. The mounting systems are designed to withstand high loads, torsional forces and dynamic impacts during vehicle operation. In development, we combine many years of experience with modern vehicle measuring and 3D scanning methods, ensuring precise adaptation to each individual vehicle.

We offer front, rear and side mounting plates for trucks, tractors and other special-purpose vehicles. The systems enable quick attachment of various implements and reduce vehicle preparation time for seasonal and maintenance work. Fixed or quick-change chassis solutions are available for spreaders and other attachments.

For tractor upgrades, we provide tailor-made solutions. We install fixed or quick-change mounting systems and, where required, add chassis reinforcements, guards and adapters for various attachments.

Each vehicle upgrade is manufactured to high quality standards. The structure is resistant to torsion and bending and adapted to the requirements of the individual vehicle and attachments. For completed upgrades, we prepare the relevant technical documentation and reports, helping to simplify homologation procedures, technical inspections and the registration of vehicle modifications.

Mechanical upgrades enable fast installation and replacement of attachments between different work tasks. They are suitable for snow ploughs, spreaders, telescopic mowers, mulchers, sweepers and other municipal attachments. This allows one vehicle to perform several different functions throughout the year, which is an important advantage of municipal vehicle upgrades for year-round use.

Vehicle upgrades for attachments – hydraulic systems

Our wide range of hydraulic vehicle upgrades enables the operation of spreaders, liquid sprayers, snow ploughs, sweepers and other hydraulic attachments. Hydraulic systems provide power and control for attachments on municipal, road maintenance and service vehicles and are adapted to the requirements of each attachment in terms of oil flow, working pressure and the number of hydraulic functions.

Available systems include EHS (single-circuit), DHS (dual-circuit) and THS (triple-circuit). For all three, we also offer intelligent iHS – Intelligent Hydraulic Systems solutions, which include protective and intelligent elements. These allow the operator to focus on driving while the hydraulic system automatically ensures optimal attachment performance.

Hydraulic system control

Hydraulic systems are designed according to the number and type of connected devices and complemented by an advanced control unit. The standard solution is the RRiC unit with a control joystick, touchscreen display and buttons, while more demanding users can choose iCOM with a control joystick and a separate LCD control panel, enabling complete control over all attachments. Through the system, the operator can monitor attachment operation in real time, adjust parameters and receive warnings about potential faults or service requirements.

The system includes numerous features:

• Attachment control and visual monitoring
• LCD control panels in various sizes
• CAN-BUS connections
• Attachment operation display
• Fault logging
• Event history
• Operating and service hour counters
• System parameter display
• Integrated speakers
• Warnings in case of improper operation
• Protection of hydraulic components
• Menu in multiple languages

Electrical vehicle upgrades

We offer additional electrical upgrades that improve the visibility of the vehicle and attachments in traffic and increase safety at work. Electrical upgrades include the installation of warning lights, work lights, cameras, additional electrical connections and control systems for attachments. They are intended to increase the safety, visibility and functionality of the vehicle when carrying out municipal, maintenance and winter service operations.

Rotating warning beacons, LED flashers, light boards and other traffic signalling elements can be installed on the cab or chassis. We also install raised work lights in LED or halogen versions, which replace the vehicle’s standard lights when they are obstructed by an attachment and provide the driver with good visibility of the road, even in demanding winter conditions.

Electrical upgrades can also include cameras for monitoring attachments, additional cameras, additional sockets and integration with the vehicle’s existing electronic systems. This ensures safe and efficient operation of attachments during work.

Frequently asked questions

Which attachments can be installed on a vehicle?
Mounting and hydraulic systems enable the use of snow ploughs, spreaders, sweepers, mowers, mulchers, liquid sprayers and other municipal attachments. The solution is adapted to the intended use and technical characteristics of the vehicle.

Which vehicles are suitable for upgrades?
We manufacture upgrades for trucks, tractors and other special-purpose vehicles. The systems are adapted to the individual vehicle model and user requirements. We also carry out conversions and adaptations of Unimog vehicles when the standard vehicle configuration does not allow the desired use, or when certain requirements were not foreseen at the vehicle ordering stage.

Is a tailor-made solution possible?
Each mounting, hydraulic or electrical system is designed according to the selected attachments, working conditions and intended vehicle use.

I already have a vehicle. Can it be upgraded for municipal use and attachments?
In most cases, this is possible. Based on the documentation or an inspection of the vehicle, we check the possibilities for installing mounting, hydraulic and electrical systems and prepare a suitable solution for the selected attachments.

My vehicle does not have a prepared power take-off for a hydraulic pump. What are the options?
This is usually not an obstacle. For vehicles without a prepared power take-off, various solutions are available, from electro-hydraulic systems to other methods of driving attachments. We also offer attachments that do not require a conventional vehicle hydraulic system for their operation.

How do I choose or configure the right vehicle for an upgrade?
We provide advice on vehicle selection already at the investment planning stage. In cooperation with manufacturers and dealers, we help determine the appropriate chassis, payload, drive system, hydraulic preparation and other equipment according to the intended work. With the correct configuration, later modifications and additional costs can often be avoided.

Do you also carry out upgrades on site?
Yes. We also carry out installations at the customer’s location. Projects are carried out throughout Europe, and for many vehicles we already have developed standard solutions. Before starting a project, we can carry out an inspection, measurement and technical assessment of the vehicle, and check the possibilities for installation and adaptation to the customer’s requirements.

Are the upgrades compatible with AEBS (Advanced Emergency Braking System) and other assistance systems on new trucks?
Yes. When designing upgrades, we take into account radar sensors, cameras and other components of AEBS and other vehicle assistance systems. We have experience with vehicles from manufacturers such as MAN (EBA and ACC systems), Mercedes-Benz (ABA system), Renault Trucks, Volvo, Scania, Iveco, DAF and other manufacturers. We actively monitor manufacturer developments and create solutions that ensure the compatibility of upgrades with new vehicle generations and their safety requirements.

The post Vehicle upgrades for attachments appeared first on Riko Ribnica.

Main advantages

• Easy maintenance
• Weed removal and kerbside cleaning
• Dump material in the skip or over the edge of the carriageway

Characteristics

The PVK sweeper is designed to pick up and remove material (grit, sand, dust, etc.). Typical applications are asphalted or paved surfaces and pathways. In addition to sweeping the carriageway and pavement edge, the sweeper can also be used to clean drainage slopes at the edge of the carriageway and mulches.

The side brush is suitable for sweeping along road verges, buildings and all areas that cannot be accessed with the basic brush. The side brush allows the material to be swept to the left or right side, the advantage of this function is that you can clean the area over the edge of the carriageway and consequently reduce the emptying intervals of the dustbin. With different brush combinations, you can adapt the device to your needs (weed removal, cleaning of sensitive surfaces, etc.).

The PVK sweeper can be equipped with a wetting system to speed up the settling of dust that may rise during sweeping. Water spraying is carried out via a water pump and nozzles, and the tanks are mounted on the device or on the vehicle. The unit features easy maintenance and a quick brush change system.

Drive and control

Machine functions such as steering, brush drive, bin emptying and side brush drive are implemented via hydraulic control circuits of the carrier vehicle.

Installation and mounting options

The sweeper can be mounted on universal work vehicles of the Unimog type, tractor or construction machine (JCB, CAT, etc.).

The post PVK Sweeping device appeared first on Riko Ribnica.

SweepAway is a simple and efficient push broom designed for professional cleaning. With its strong road-grade bristles, it meets the demands for versatility, robustness, and durability. It is easy to operate and maintain, with no complex high-tech components or rotating parts.

It is suitable for removing various materials such as leaves, sand, stones, debris, and even snow and mud. Available in different widths and series – light and medium – it can be adapted to a wide range of vehicles and machines with forklift or excavator attachments.

SweepAway is designed with replaceable polypropylene bristles, allowing easy maintenance and long broom life. Its modular construction enables quick replacement of individual parts, maintaining maximum cleaning efficiency.

Mounting is possible on various work vehicles, including forklifts, excavators, pickups, light commercial vehicles, and similar platforms, enabling wide use of the SweepAway broom across different work setups.

Various optional accessories are also available to further enhance the device’s functionality and adaptability:

• Side brushes
• Leaf retention brushes
• Mounting straps
• Edge markers

Mounting options include:

• Forklifts
• Trailers
• Three-point linkage
• Euro standard
• Attachment to loader buckets
• CAT 0 or municipal linkages
• Other types of mounting

The post SweepAway push broom for machines appeared first on Riko Ribnica.

Key Advantages

• Excellent maneuverability
• Technologically advanced
• Environmentally friendly

Description

As the official representative of Bucher Municipal, we present the CityCat compact road sweepers series. These sweepers are distinguished by outstanding maneuverability and stability. The steering system with both all-wheel steering or articulated steering enables sweeping even in the tightest turns and narrow streets. With their technological solutions, they are perfect machines for cleaning large areas, car parks, shopping centers, or entire cities.

Sweeping system

The floating suction head ensures a wide picking width for larger debris, while the energy‑optimized fan with maximum airflow velocity delivers perfect sweeping results regardless of surface irregularities.

A wide inlet for larger debris and an energy‑efficient fan combined with a floating suction entry that features a patented fastening mechanism guarantee maximum airflow speed for perfect sweeping results irrespective of surface unevenness. The hopper is made of stainless steel for long life. The hopper can be operated either externally or directly from the cabin.

Comfort

The cab is fitted with two full‑feature driver seats complete with headrests, offering not only a comfortable driving experience but also an ergonomic working environment.

A walk‑through cab, soft‑grip steering wheel, and ergonomic armrest controls ensure a pleasant and efficient sweeping experience. Excellent visibility is supported by large heated front glass and glass doors, as well as cameras whose footage can be displayed on Smart‑Con and CSense screens.

Chassis

A specially designed suspension ensures a unique and comfortable ride, while contributing to a lightweight and maintenance‑friendly sweeper design. By reducing shocks and vibrations, this suspension reduces operator fatigue and strain, enhancing operational readiness and road safety.

Series

CityCat VR17e – small in size, big in performance

Key specifications:

• Can be driven with a category B driving license
• 1.7 m³ hopper capacity
• 3.5 t gross weight with 1.4 t payload
• 225 l water tank capacity
• Hydrostatic four-wheel steering
• Working speed 0–12 km/h
• Travel speed 0–40 km/h
• 2400 mm sweeping width

CityCat VS20 – lighter and more mobile sweeper

Key specifications:

• Operable with category B driving license
• 2.0 m³ hopper volume
• 3.5 t gross weight with 1.0 t payload
• 425 l fresh water tank
• Articulated steering
• Working speed 0–15 km/h
• Transport speed 0–40 km/h
• 2,700 mm sweeping width

CityCat VS20e – lighter and more mobile 100% electric sweeper

Key specifications:

• Operable with category B driving license
• 45 kWh automotive lithium‑ion battery
• 2.0 m³ hopper volume
• 3.5 t gross weight with 1.0 t payload
• 425 l water tank
• Articulated steering
• Working speed 0–15 km/h
• Transport speed 0–40 km/h
• 2,700 mm sweeping width

CityCat V20 – leading 2 m³ sweeper

Key specifications:

• Diesel engine meeting Euro 6 emission standard
• 2.0 m³ hopper volume
• 4.8 t gross weight with 2.1 t payload
• 425 l water tank
• Articulated steering
• Working speed 0–15 km/h
• Transport speed 0–50 km/h
• 2,700 mm sweeping width

CityCat V20e – 100% electric sweeper

Key specifications:

• 63 kWh automotive lithium‑ion battery
• 4.8 t gross weight with 2.1 t payload
• 2.0 m³ hopper volume
• 425 l water tank
• Articulated steering
• Working speed 0–15 km/h
• Transport speed 0–50 km/h
• 2,700 mm sweeping width

CityCat VR50 – performance in the compact sweeper class

Key specifications:

• Diesel engine meeting Euro 6 emission standard
• 10.5 t gross weight with 5.5 t payload
• 5.0 m³ hopper volume
• 880 l water tank
• Hydrostatic 4-wheel steering
• Working speed 0–20 km/h
• Transport speed 0–80 km/h
• Low fuel consumption

CityCat VR50e – 100% electric sweeper

Key specifications:

• 137 kWh automotive lithium‑ion battery
• 10.5 t gross weight with 5.5 t payload
• 5.0 m³ hopper volume
• 880 l water tank
• Hydrostatic 4‑wheel steering
• Working speed 0–20 km/h
• Transport speed 0–50 km/h
• Low energy consumption

CityCat Compact road sweepers

CityCat V20

CityCat VR50

The post CityCat Compact road sweepers appeared first on Riko Ribnica.

Main Advantages

• Reliability and long service life
• Exceptional suction power
• Large hopper capacity

Description

As the official representative of Bucher Municipal, we offer a wide range of highly powerful truck-mounted sweepers from the MaxPowa series – models V50, V65, V80, and V120, mounted on various truck chassis according to user preference. These sweepers are adapted for operation in diverse environments and deliver maximum efficiency.

Built with high-quality materials and proven technology, these machines continue a decades-long tradition of success. The MaxPowa series offers high productivity as standard and a wide range of additional options, including an electric version for zero-emission sweeping with low operating costs.

Sweeping System

The advanced brush system ensures thorough cleaning all the way to the curb, even in hard-to-reach areas. The sweepers are equipped with exceptional suction power and are ideal for cleaning demanding surfaces. All V series models feature Smoothflow technology – a redesigned airflow system that increases air intake and reduces losses, improving suction performance and reducing fuel consumption and noise.

The MaxPowa series combines durability and innovative technology for reliable operation. With a stainless steel hopper and integrated water tank, it is ready for the harshest conditions. Easily replaceable rubber seals and brushes make maintenance simple, while the Pressadrain system allows easy water drainage before freezing. Self-cleaning nozzles and LED lighting ensure top performance and safe operation in all conditions.

Low Water Consumption

The MaxPowa series is equipped with nozzles that reduce water usage by up to 20%. For more demanding applications, high-flow nozzles are available. An optional water recirculation system enables savings of up to 900 liters of water per day.

JVM Control

MaxPowa models are equipped with an advanced 10-inch touchscreen display featuring clear graphics and an intuitive interface. Operation is simple, the menu is easy to navigate, and functions are quickly accessible. Up to six fully programmable buttons allow instant setting selection with a single press.

The ergonomic controller enables management of all functions – brush position, pressure, speed, nozzle opening, and water flow.

MaxPowa Series

MaxPowa V50 – a compact powerhouse

Key specifications:

• 5.0 m³ hopper capacity
• 1330 l water tank capacity

MaxPowa V65 – built for longevity, designed for performance

Key specifications:

• 6.5 m³ hopper capacity
• 1545 l water tank capacity

MaxPowa V65e – 100% electric sweeper

Key specifications:

• 6.5 m³ hopper capacity
• 1545 l water tank capacity

MaxPowa V80 – powerful machine for the most demanding conditions

Key specifications:

• 8.0 m³ hopper capacity
• 2300 l water tank capacity

MaxPowa V120 – the largest in its class

Key specifications:

• 12.0 m³ hopper capacity
• 5200 l water tank capacity

MaxPowa Truck-Mounted Sweepers

MaxPowa Sweeping System

MaxPowa V65t ESU Removal Option

The post MaxPowa Truck-mounted sweepers appeared first on Riko Ribnica.

• Simple operation
• Safety and reliability
• Quick installation

Characteristics

The rear-mounted telescopic KS mower is a professional and reliable solution for mowing grass, shrubs and similar vegetation in areas along roads and canals. The telescopic arms are made of high-quality material with a range of 5.3 or 6.0 meters. Simple mounting and demounting of the mower make it possible to use the tractor for other applications in just a few minutes. The cutting head on the crane arm can be replaced with any of the additional implements, increasing usability to cleaning the roadside trenches, dumping snow or cutting branches.

Drive and control

The mower has a hydraulic unit powered via the PTO shaft to drive the control system of the levers and the rotor on the cutting head or other implement. Hydraulic unit circuits of the vehicle can also be used. The mower is equipped with an advanced proportional steering system with a single-hand joystick and a Riko iCom LCD colour control panel. The mower is operated by the driver from the vehicle’s cabin.

Functions of the iCom control panel:

• LCD colour display
• CAN bus connection and certified control panel
• Adjustable parameters on the control panel
• Setting the speed of arm movements
• Cutting head on/off
• Automatic adapting of the cutting head to terrain
• Electro-protected operating positions
• Display of warning messages
• Service menu
• Visual display of functions
• Switch to night lighting of the display and buttons
• USB port – easy reprogramming and troubleshooting
• Selection of user language (SL, CR, SR, DE, EN, ES…)

 A number of other features are available – contact us for more information.

Installation and mounting options

The KS mower can be rear-mounted on various vehicles (mainly tractors) with a three-point hitch size 2 or 3. The stability during mowing is achieved by proper hitching and optionally with additional counterweights on the rim of the left wheel. The mower is distinguished by quick installation, and after mowing it is placed on the support legs on the frame.

Safety system

The protection of the mower against mechanical damage when an obstacle is encountered is carried out between the hinges of the levers and the frame with a hydraulic roller and hydraulic accumulator. The cutting head or other implements move away from the obstacle and return to their original position themselves. A RIKOSLED tracking system is an option located between the second lever and the cutting head, allowing automatic adapting to uneven terrain.

The post KS Telescopic mower appeared first on Riko Ribnica.

• Long reach
• Safety and reliability
• Good overview over the process

Characteristics

The BK side-mounted telescopic mower is a professional and reliable solution for mowing grass, shrubs and similar vegetation in areas along roads and canals. The crane arms are made of high-quality material with extremely long reach. The mower is located between the front and rear axles of the tractor, so the driver is provided with excellent visibility and avoids obstacles easier when working. The cutting head on the crane arm can be replaced with any of the additional implements, increasing usability to cleaning the roadside trenches, dumping snow or cutting branches.

Drive and control

The mower has a hydraulic unit powered via the PTO shaft to drive the control system of the levers and the rotor on the cutting head or other implement. Hydraulic unit circuits of the vehicle can also be used. The mower is equipped with an advanced proportional steering system with a single-hand joystick and a Riko iCom LCD colour control panel. The mower is operated by the driver from the vehicle’s cabin.

Functions of the iCom control panel:

• LCD colour display
• CAN bus connection and certified control panel
• Adjustable parameters on the control panel
• Setting the speed of arm movements
• Cutting head on/off
• Automatic adapting of the cutting head to terrain
• Electro-protected operating positions
• Display of warning messages
• Service menu
• Visual display of functions
• Switch to night lighting of the display and buttons
• USB port – easy reprogramming and troubleshooting
• Selection of user language (SL, CR, SR, DE, EN, ES…)

 A number of other features are available – contact us for more information.

Installation and mounting options

The BK mower is mounted on the right side of the tractor of a suitable size. The support cart for demounting the mower makes mounting or demounting easier, and protects the mower when not in use.

Safety system

The protection of the mower against mechanical damage when an obstacle is encountered is carried out between the hinges of the levers and the frame with a hydraulic roller and hydraulic accumulator. The cutting head or other implements move away from the obstacle and return to their original position themselves. A RIKOSLED tracking system is an option located between the second lever and the cutting head, allowing automatic adapting to uneven terrain.

BK equipment

• Hitch frame adjusted to tractor type
• Mowing on the right side
• Cutting head
• Hitch frame for implements
• Hydraulic installation
• Telescope
• Selection of mower operation

There are a number of options and additional equipment available – contact us for more information.

The post BK Side-mounted telescopic mower appeared first on Riko Ribnica.

• Easy to use
• Mowing on the left or right side
• Good overview over the process

Characteristics

The front-mounted crane KP mower is a professional and reliable solution for mowing grass, shrubs and similar vegetation in areas along roads and canals. The range of up to 6 metres enables mowing on various surfaces. The mower is distinguished by the option of mowing on the left and right side. The cutting head on the crane arm can be replaced with any of the additional implements, increasing usability to cleaning the roadside trenches, dumping snow or cutting branches.

Drive and control

The mower has a hydraulic unit powered via the PTO shaft to drive the control system of the levers and the rotor on the cutting head or other implement. Hydraulic unit circuits of the vehicle can also be used. The mower is equipped with an advanced proportional steering system with a single-hand joystick and a Riko iCom LCD colour control panel. The mower is operated by the driver or co-driver from the vehicle’s cabin.

Functions of the iCom control panel:

• LCD colour display
• CAN bus connection and certified control panel
• Adjustable parameters on the control panel
• Setting the speed of arm movements
• Cutting head on/off
• Automatic adapting of the cutting head to terrain
• Electro-protected operating positions
• Display of warning messages
• Service menu
• Visual display of functions
• Switch to night lighting of the display and buttons
• USB port – easy reprogramming and troubleshooting
• Selection of user language (SL, CR, SR, DE, EN, ES…)

 A number of other features are available – contact us for more information.

Installation and mounting options

The mower is mounted on a standard mounting plate of various working machines.

Safety system

The protection of the mower against mechanical damage when an obstacle is encountered is carried out between the hinges of the levers and the frame with a hydraulic roller and hydraulic accumulator. The cutting head or other implements move away from the obstacle and return to their original position themselves. A RIKOSLED tracking system is an option located between the second lever and the cutting head, allowing automatic adapting to uneven terrain.

KP equipment

• Hitch frame adjusted to tractor type
• Mowing on the right side
• Option of mowing on the left
• Cutting head
• Hitch frame for implements
• Hydraulic installation
• Telescope
• Selection of mower operation

 There are a number of options and additional equipment available – contact us for more information.

The post KP Front telescopic mower appeared first on Riko Ribnica.

• High mowing speed
• Grass vacuum option
• Good control

Characteristics

The KK telescopic chassis mower is a professional and reliable solution for mowing grass, shrubs and similar vegetation in areas along roads and canals. The range of up to 7.3 meters enables mowing on various hard to reach surfaces. The mower is also available as KK 8S with the option of vacuuming the grass into a suitable container. The cutting head on the crane arm can be replaced with any of the additional implements, increasing usability to cleaning the roadside trenches, dumping snow or cutting branches.

Drive and control

The mower has a hydraulic unit powered via the PTO shaft to drive the control system of the levers and the rotor on the cutting head or other implement. Hydraulic unit circuits of the vehicle can also be used. The mower is equipped with an advanced proportional steering system with a single-hand joystick and a Riko iCom LCD colour control panel. The mower is operated by a co-driver (also a driver) from the vehicle’s cabin.

Functions of the iCom control panel:

• LCD colour display
• CAN bus connection and certified control panel
• Adjustable parameters on the control panel
• Setting the speed of arm movements
• Cutting head on/off
• Automatic adapting of the cutting head to terrain
• Electro-protected operating positions
• Display of warning messages
• Service menu
• Visual display of functions
• Switch to night lighting of the display and buttons
• USB port – easy reprogramming and troubleshooting
• Selection of user language (SL, CR, SR, DE, EN, ES…)

 A number of other features are available – contact us for more information.

Installation and mounting options

The KK mower can be mounted on various vehicles with a caisson (especially of Unimog family). To increase the stability of the vehicle during mowing, a counterweight is installed to the left of the hitch frame and the rear axle is hydraulically stabilised at the same time.

Safety system

The protection of the mower against mechanical damage when an obstacle is encountered is carried out between the hinges of the levers and the frame with a hydraulic roller and hydraulic accumulator. The cutting head or other implements move away from the obstacle and return to their original position themselves. A RIKOSLED tracking system is an option located between the second lever and the cutting head, allowing automatic adapting to uneven terrain.

KK equipment

• Mounting frame
• Mechanical rear axle lock
• Mowing on the right side
• Weights
• Cutting head
• Suction system
• Hitch frame for implements
• Hydraulic installation
• Selection of mower operation

 There are a number of options and additional equipment available – contact us for more information.

The post KK Telescopic chassis mower appeared first on Riko Ribnica.

Telescopic arm mulchers from the AgriTeam series provide a compact, lightweight, and highly maneuverable solution for smaller tractors. They are versatile – ideal for municipal and maintenance work, agricultural areas, private lawns, and roadside zones where agility is crucial. With a low center of gravity for stable operation, selected models reach almost 6 m from the tractor center, ensuring efficient mowing even on challenging terrain.

Control systems for telescopic arm mulchers AgriTeam

Choose from four control systems – from classic mechanical to advanced proportional electric systems with CAN-Bus technology for complete arm operation control.

CLASSIC – Cable Controls
Cost-effective solution for basic mulcher operation. Controls all arm functions, reach, and head tilt, while additional levers operate fuse reset and rotor start, stop, and reverse rotation. Ideal for users seeking low-cost operation without electronic components.

ELECTRA – Semi-electric Control
Joystick-operated electric system for simple and clear control. The joystick manages the first and second arm sections, while head tilt is controlled electrically via buttons above the joystick. Rotor movement is operated through a flexible cable, functioning in a basic ON/OFF mode.

ELECTRA-FULL – Full Electric Control
Joystick-operated electric system providing easy management of all basic functions. Arm sections are controlled via joystick, head tilt via buttons, and rotor START/STOP is electric without additional cabin levers or cables. Operates in simple ON/OFF mode for reliable, non-proportional control.

DS-Tronic – Proportional Electro-hydraulic Control
EG-Tronic is a 4-function proportional electric system with CAN-Bus technology designed for demanding users. It enables smooth, proportional operation of all arm functions, avoiding abrupt movements. Features a control console with buttons for all functions, working hours counter, and emergency stop capability.

Compact tractor-mounted telescopic arm mulcher TD

• TD: 31 HP hydraulic motor, 20 HP rotor
• Max. reach: 3.84 – 4.33 m
• Head tilt angle: 190°
• Machine weight: 490 – 495 kg
• Tractor power: 40 – 70 HP
• Minimum tractor weight: 2,000 kg
• Minimum tractor width: 1.50 – 1.70 m
• Hydraulic oil tank capacity: 70 l

Compact tractor-mounted telescopic arm mulcher TG

• TG: 45 HP hydraulic motor, 35 HP rotor
• Max. reach: 5.00 m
• Head tilt angle: 235°
• Machine weight: 860 kg
• Tractor power: 60 – 80 HP
• Minimum tractor weight: 2,600 kg
• Minimum tractor width: 1.90 m
• Hydraulic oil tank capacity: 120 l

Compact tractor-mounted telescopic arm mulcher TM

• TM: 45 HP hydraulic motor, 35 HP rotor
• Max. reach: 4.56 – 5.48 m
• Head tilt angle: 190°
• Machine weight: 742 – 752 kg
• Tractor power: 50 – 80 HP
• Minimum tractor weight: 2,700 – 3,000 kg
• Minimum tractor width: 1.80 m
• Hydraulic oil tank capacity: 125 l

Compact tractor-mounted telescopic arm mulcher TP

• TP: 57 HP hydraulic motor, 42 HP rotor
• Max. reach: 4.82 – 6.40 m
• Head tilt angle: 190°
• Machine weight: 865 – 1,000 kg
• Tractor power: 60 – 90 HP
• Minimum tractor weight: 3,100 – 3,500 kg
• Minimum tractor width: 2.00 – 2.30 m
• Hydraulic oil tank capacity: 137 l

Optional Equipment and Attachments

The AgriTeam telescopic arm mulcher series is compatible with various attachments for enhanced versatility:

• Different mulcher heads
• Cutter bars

Other telescopic arm mulcher series

Not finding the perfect mulcher for your vehicle? Explore other models designed for different machines and operational needs.

AgriTeam Series – LeaderTeam Series – ProTeam Series

The post Telescopic arm mulchers series AgriTeam appeared first on Riko Ribnica.

Telescopic arm mulchers from the LeaderTeam series are designed for professional use in municipal, road, and construction companies, as well as for maintenance of public and private green areas. Available models offer a reach of 5,0 to 6,27 meters and are suitable for mounting on medium-sized tractors. The series ensures an optimal balance between power and performance.

Control systems for telescopic arm mulchers LeaderTeam

Choose from three control systems – from classic mechanical to advanced proportional electric systems with CAN-Bus technology for complete control over the arm’s operation.

CLASSIC – Cable Controls

Cost-effective solution for basic mulcher operation. Controls all arm functions, reach, and head tilt, while additional levers operate fuse reset and rotor start, stop, and reverse rotation. Ideal for users seeking low-cost operation without additional electronic components.

DS-Tronic Dual – Electric Control

Electric joystick system without hydraulic lines, connected via electric cable to the control unit. Buttons on the display allow START/STOP functions for the machine and rotor, each with LED indicators. The joystick controls head functions such as floating mode, rotor rotation, and machine operating hours monitoring.

SC-Tronic Dual – Advanced Proportional Control

Dual-section proportional electric control with advanced CANBus technology provides full control over the arm. The SC Tronic Dual system allows precise management of the first and second parts of the telescopic arm via an ergonomic joystick, while rollers ensure smooth rotation and head tilt. Additional buttons control the telescopic extension and head activation for terrain adaptation, while a separate console manages the rotor, arm suspension, nitrogen accumulator, and the Electronic Floating System (EFS) for stable and smooth operation.

Tractor telescopic arm mulcher TSI

• TSI: 63 HP hydraulic motor, 49 HP rotor
• Max. reach: 5,00 – 6,00 m
• Head tilt angle: 190°
• Machine weight: 1.190 – 1.230 kg
• Tractor power: 90 – 110 HP
• Minimum tractor weight: 3,700 kg
• Minimum tractor width: 2,10 – 2,30 m
• Hydraulic oil tank capacity: 130 l

Tractor telescopic arm mulcher TSI VISION

• TSI VISION: 63 HP hydraulic motor, 49 HP rotor
• Max. reach: 5,00 m
• Articulated arm moved forward towards tractor cab: 1,50 m (fixed)
• Head tilt angle: 210°
• Machine weight: 1,230 kg
• Tractor power: 100 – 110 HP
• Minimum tractor weight: 3,700 kg
• Minimum tractor width: 2,30 m
• Hydraulic oil tank capacity: 130 l

Tractor telescopic arm mulcher TSI VISION PRO

• TSI VISION PRO: 63 HP hydraulic motor, 49 HP rotor
• Max. reach: 6,00 m
• Articulated arm moved forward towards tractor cab: 2.48 m (hydraulic)
• Head tilt angle: 190°
• Machine weight: 1,380 kg
• Tractor power: 100 – 130 HP
• Minimum tractor weight: 3,800 kg
• Minimum tractor width: 2,40 m
• Hydraulic oil tank capacity: 130 l

Tractor telescopic arm mulcher TXV VISION

• TXV VISION: 63 HP hydraulic motor, 49 HP rotor
• Max. reach: 5,24 – 6,25 m
• Arm on the pivot (+30°) shifted forward towards the tractor cab: up to 3,31 m
• Head tilt angle: 230°
• Machine weight: 1.250 – 1.295 kg
• Tractor power: 90 – 130 HP
• Minimum tractor weight: 3,700 kg
• Minimum tractor width: 2,30 – 2,40 m
• Hydraulic oil tank capacity: 210 l

Front-mounted telescopic arm mulcher TST

• TST: 45 HP hydraulic motor, 35 HP rotor
• Max. reach: 5,75 m
• Head tilt angle: 180°
• Mounting system: municipal plate or three-point linkage, suitable for tractors or Unimog vehicles
• Drive: PTO or hydraulic
• Minimum vehicle weight: 4.000 kg
• Minimum vehicle width: 2,30 m

Optional equipment and attachments

The LeaderTeam telescopic arm mulcher series is compatible with various attachments, enhancing versatility and adaptability for different tasks:

• Different mulcher heads for various types of vegetation
• Branch cutters of varying lengths
• Channel and trench cutters
• Blowers

Other telescopic arm mulcher series

Not finding the perfect mulcher for your vehicle? Explore other models designed for different machines and operational needs.

AgriTeam Series – LeaderTeam Series – ProTeam Series

The post Telescopic arm mulchers series LeaderTeam appeared first on Riko Ribnica.

Telescopic arm mulchers from the ProTeam series are designed for professional daily use. Available in ENERGY and POWER models with a reach of 5.3 to 9.3 meters, they are suitable for mounting on larger tractors and Mercedes-Benz Unimog vehicles. The series ensures maximum performance and durability for demanding municipal and forestry tasks.

SC-Tronic Dual Control for Telescopic Arm Mulchers

The dual-section proportional electric control with advanced CANBus technology provides full control over the arm’s operation. The SC Tronic Dual system allows precise control of the first and second parts of the telescopic arm via an ergonomic joystick, while rollers ensure smooth rotation and head tilt. Additional buttons control the telescopic extension and head activation for terrain contour adaptation, while a separate console manages the rotor, arm suspension, nitrogen accumulator, and the Electronic Floating System (EFS) for stable and smooth operation.

Tractor telescopic arm mulcher TSP

• TSP ENERGY: 63 HP hydraulic motor, 57 HP rotor
• TSP POWER: 79 HP hydraulic motor, 75 HP rotor
• Max. reach: 5,34 – 6,12 m
• Head tilt angle: 235°
• Machine weight: 1.500 – 1.560 kg
• Tractor power: 110 – 130 HP
• Minimum tractor weight: 4.000 kg
• Minimum tractor width: 2,30 – 2,40 m
• Hydraulic oil tank capacity: 122 – 155 l

Tractor telescopic arm mulcher TSP VISION

• TSP VISION ENERGY: 63 HP hydraulic motor, 57 HP rotor
• TSP VISION POWER: 79 HP hydraulic motor, 75 HP rotor
• Max. reach: 5,52 m
• Articulated arm moved forward towards tractor cab: 1.64 m (fixed)
• Head tilt angle: 235°
• Machine weight: 1.520 kg
• Tractor power: 110 – 130 HP
• Minimum tractor weight: 4.200 kg
• Minimum tractor width: 2,30 – 2,40 m
• Hydraulic oil tank capacity: 122 – 155 l

Tractor telescopic arm mulcher TKD POWER

• TKD POWER: 90 HP hydraulic motor, 84 HP rotor
• Max. reach: 6,10 m
• Articulated arm moved forward towards tractor cab: 2,45 m (hydraulic)
• Head tilt angle: 235°
• Machine weight: 1.755 kg
• Tractor power: 130 – 150 HP
• Minimum tractor weight: 6.000 kg
• Minimum tractor width: 2,40 m
• Hydraulic oil tank capacity: 120 l

Tractor telescopic arm mulcher TKP POWER

• TKP POWER: 90 HP hydraulic motor, 84 HP rotor
• Max. reach: 7,07 – 9,30 m
• Head tilt angle: 235°
• Machine weight: 1.755 kg
• Tractor power: 130 – 150 HP
• Minimum tractor weight: 7.500 kg
• Minimum tractor width: 2,40 m
• Hydraulic oil tank capacity: 140 – 160 l

Front-mounted telescopic arm mulcher TSF 600/600D

• TSF 600: front-mounted drive unit – 75 HP hydraulic motor, 52 HP rotor
• TSF 600D: rear-mounted drive unit – 75 HP hydraulic motor, 54 HP rotor
• Max. reach: 5,75 m
• Head tilt angle: 180°
• Mounting system: municipal plate or three-point linkage
• Minimum vehicle weight: 5.500 kg
• Minimum vehicle width: 2,50 m

Optional equipment and attachments

The ProTeam telescopic arm mulcher series is compatible with various attachments, increasing versatility and adaptability for different tasks:

• Different mulcher heads for various vegetation types
• Branch cutters of varying lengths
• Channel and trench cutters
• Blowers

Other telescopic arm mulcher series

Not finding the perfect mulcher for your vehicle? Explore other models designed for different machines and operational needs.

AgriTeam Series – LeaderTeam Series – ProTeam Series

The post Telescopic arm mulchers series ProTeam appeared first on Riko Ribnica.

The SKI guardrail mower is a professional solution for maintaining embankments along roads and highways. It is designed for efficient mowing beneath guardrails and safety barriers, as well as around roadside delineator posts, poles, trees and other obstacles.

The SKI series is designed for mounting on tractors and Mercedes-Benz Unimog vehicles with a front mounting system and PTO drive. The patented mowing system enables continuous operation around obstacles, high productivity and a minimal amount of uncut vegetation.

SKI mower models

The SKI DX model is designed for mowing beneath guardrails on the right-hand side of the vehicle. The front-mounted version is suitable for tractors and Mercedes-Benz Unimog vehicles with a front mounting system and PTO drive, enabling fast and efficient maintenance of road infrastructure.

The SKI DX-SX model features a central pivot joint that allows the entire mowing unit to rotate. This enables mowing beneath guardrails on both the right-hand and left-hand sides of the vehicle, significantly increasing machine flexibility and reducing working time on different road sections.

Main advantages of the SKI mower

• Efficient mowing beneath guardrails and safety barriers, as well as around roadside delineator posts, poles and other obstacles
• Patented hydraulic lifting system for the outer cutting disc
• The inner cutting disc continues mowing while the outer disc is raised
• Mowing around obstacles without stopping the machine
• Self-levelling system for adapting to the terrain
• Electric control of all working functions

Front mounting on a tractor or Unimog

The SKI mower is designed as a front-mounted attachment for tractors equipped with a front three-point linkage and front PTO. With an additional adapter, it can also be mounted on the DIN 76060 municipal mounting plate of a Mercedes-Benz Unimog.

The 2-in-1 mounting system allows the same mowing unit to be used on different carrier vehicles. The machine is driven by a front PTO operating at 1,000 rpm. The 12/24 V electrical system is suitable for both tractors and municipal vehicles, while all working functions are controlled through an electric control unit.

Patented mowing system for guardrails

The patented hydraulic system allows the outer arm and outer cutting disc to be raised when passing over roadside delineator posts, poles, trees or other obstacles. When the arm is raised, the outer cutting disc stops automatically, while the inner disc continues mowing without interruption.

Thanks to the continuous operation of the inner disc, the machine does not need to stop or significantly reduce its working speed when passing an obstacle. This enables faster maintenance of long guardrail sections and reduces the amount of uncut vegetation around roadside obstacles.

Mowing on the right and left side

The SKI DX-SX version features a central pivot joint around which the entire mowing unit rotates. This design enables mowing beneath guardrails on both the right-hand and left-hand sides of the vehicle.

The rotating mowing unit increases the machine’s flexibility on different road sections and reduces the need for additional manoeuvring of the carrier vehicle.

Automatic opening and closing of the cutting discs

When the cutting discs come into contact with an obstacle, they open with the assistance of a mechanical servo system. After the obstacle has been passed, the electro-hydraulic system automatically closes the mowing unit and returns it to its normal working position.

The hydraulic control also allows both cutting discs to be fully opened. This function makes it easier to overcome larger obstacles during operation and to position the mowing unit around the guardrail when starting work.

Electric safety system during operation

The electric safety system monitors the position of the outer arm and the operation of the cutting discs. When the outer arm is raised by more than 15° while passing an obstacle, the drive of the outer cutting disc stops automatically, while the inner disc continues mowing. When the outer arm returns below an angle of 15°, the outer disc automatically resumes operation, without requiring a system reset.

When the arm is raised fully into the vertical position, for example at the end of work or when moving into the transport position, the drive of both cutting discs is stopped for safety. To restart the discs, the mowing unit must be lowered into the working position and the disc drive reactivated using the selector switch.

Adapting the mowing unit to the terrain

Self-levelling system for the cutting discs: The cutting discs are connected to the support columns by a mechanical parallelogram system with 15 cm of travel. The system allows the discs to follow the shape and unevenness of the terrain and helps maintain a consistent cutting height.

Vertical adjustment of the mowing unit: The inner support column provides 35 cm of vertical adjustment. This allows the operator to adjust the position of the mowing unit according to the ground level, the position of the guardrail and the configuration of the roadside surface.

Telescopic lateral shift: The mowing unit provides 55 cm of telescopic lateral movement, controlled by an electrically operated hydraulic cylinder. The lateral shift enables precise positioning of the cutting discs beneath the guardrail and adjustment according to the width of the carrier vehicle.

Cutting discs and blade options

The SKI guardrail mower can be equipped with long or short blades. The choice depends on the type of vegetation, ground conditions and working environment.

The mower is equipped as standard with rigid long blades featuring a self-ventilating design. They are suitable for mowing grass and shrubs up to 1.5 cm in diameter, but are not recommended for use on stony ground.

Short blades are available as optional equipment and are suitable for different types of terrain. They enable mowing of grass and shrubs up to 1.5 cm in diameter.

Compact transport position and good visibility

The special shape of the support arms enables the mowing unit to be folded into a compact transport position. The attachment therefore does not obstruct the operator’s view during transport and allows the carrier vehicle to travel safely on public roads.

The compact design is particularly important when the mower is used on tractors and Unimog vehicles that frequently travel on public roads between different working sections.

Technical specifications of the SKI DX-SX mower

• Working width: 1,200 mm
• Portal width: 940 mm
• Hydraulic oil tank capacity: 150 l
• Total hydraulic oil capacity: 165 l
• Cutting disc speed: 2,850 rpm
• Front PTO speed: 1,000 rpm
• Telescopic lateral shift: 550 mm
• Vertical adjustment of the mowing unit: 350 mm
• Self-levelling system travel: 150 mm
• Electrical system: 12/24 V
• Machine weight: 1,150 kg

Applications of the SKI mower

The SKI mower is designed for professional contractors, road authorities and municipal companies requiring a fast and efficient solution for vegetation maintenance along transport infrastructure.

It is suitable for mowing beneath guardrails and safety barriers, maintaining road and highway embankments, and mowing around roadside delineator posts, traffic signs, poles, trees and other obstacles. It can be used along local and national roads, as well as for the professional maintenance of highway infrastructure.

The post SKI Guardrail mower appeared first on Riko Ribnica.

Ferri excavator mulchers are designed for professional use on mini excavators, medium-sized excavators and heavy excavators. The range includes solutions for municipal maintenance, construction work, slope maintenance, clearing overgrown areas and demanding forestry applications.

Different mulching head versions are available, varying in construction, rotor type, cutting tools and working performance. This makes it possible to choose the right model according to the carrier machine, hydraulic capacity and type of material to be mulched.

Quick model selection by excavator and application

• THME 60 / THME 80: for mini excavators from 1.5 to 3.0 t, mowing grass, light brush and working in narrow or hard-to-reach areas
• THLD: for mini excavators from 3.0 to 5.5 t, grass, brush, reeds, branches and light woody vegetation
• THM: for excavators from 5.5 to 10.0 t, professional mulching of grass, undergrowth, brush and woody residues
• TIR: for excavators from 10.0 to 15.0 t, a powerful hydraulic mulcher for larger areas and more demanding work
• THFB/A: forestry mulcher for mini excavators from 3.5 to 6.0 t with Apeiron rotor
• THFS/R / THFS/A: forestry mulchers for excavators from 5.0 to 9.0 t, available with hammer rotor or Apeiron rotor
• THFL/R / THFL/A: robust forestry mulchers for excavators from 9.0 to 15.0 t
• THFM/F / THFM/A: forestry mulchers for larger excavators from 12.0 to 21.0 t
• THFP/F / THFP/A: the most powerful forestry mulchers for heavy excavators over 20.0 t

Hydraulic excavator mulchers

Hydraulic excavator mulchers are designed for daily work in surface maintenance where precise reach, good manoeuvrability and reliable attachment performance are required. They are suitable for users who need an efficient solution for hard-to-reach terrain, work along infrastructure and areas where conventional machinery is not flexible enough.

Mini excavator mulcher THME

The THME model is the entry-level Ferri hydraulic mulcher series for mini excavators. Thanks to its compact construction and low weight, it is suitable for working in confined spaces, along edges, in channels, ditches and locations where good attachment control is important.

• Recommended excavator weight: 1.5 to 2.2 t
• Models: THME 60 and THME 80
• Working widths: 0.60 m and 0.80 m
• Head weight: 118 – 134 kg
• Oil flow: 16 – 48 l/min
• Max. pressure: 200 bar
• Cutting tools: Y-flails for grass and brush
• Max. material diameter: up to Ø 2 cm
• Application: grass, light brush, slopes and municipal maintenance

Mini excavator mulcher THLD

The THLD series is intended for users who need a more powerful attachment for regular work with mini excavators on overgrown areas. The more robust design enables use in more demanding conditions where, in addition to grass, denser vegetation, branch residues and uneven terrain are present.

• Recommended excavator weight: 3.0 to 5.5 t
• Models: THLD 85 and THLD 105
• Working widths: 0.85 m and 1.05 m
• Head weight: 173 – 192 kg
• Oil flow: 28 – 48 l/min
• Max. pressure: 200 bar
• Cutting tools: Y-flails or hammers
• Max. material diameter: up to Ø 4 cm
• Application: grass, brush, reeds, branches and light woody vegetation

Excavator mulcher THM

The THM series is developed for use on medium-class excavators. It is designed for users who require higher productivity, stable operation and flexibility across different types of maintenance, municipal and construction work.

• Recommended excavator weight: 5.5 – 10.0 t
• Models: THM 105 and THM 125
• Working widths: 1.05 m and 1.25 m
• Head weight: 333 – 348 kg
• Oil flow: 60 – 100 l/min
• Max. pressure: 220 bar
• Cutting tools: Y-flails, T-hammers or bidirectional hammers
• Max. material diameter: up to Ø 8 cm
• Application: professional mulching of undergrowth, brush, branches and woody residues

Excavator mulcher TIR

The TIR model represents a more powerful hydraulic excavator mulcher, intended for intensive professional use. It is suitable for applications where a wider working width, high productivity and reliability over longer working periods are required.

• Recommended excavator weight: 10.0 – 15.0 t
• Model: TIR 150
• Working width: 1.45 m
• Head weight: 630 kg
• Oil flow: 90 – 110 l/min
• Max. pressure: 220 – 270 bar, depending on motor version
• Motor version: hydraulic gear motor or piston motor
• Cutting tools: Y-flails, T-hammers or bidirectional hammers
• Max. material diameter: up to Ø 7 cm

Forestry mulchers for excavators

Forestry mulchers for excavators are intended for users who need more robust attachments for work in demanding conditions. They are used for clearing overgrown land, maintaining forest roads, clearing edges, preparing sites and removing dense vegetation where greater rotor and cutting tool resistance is required.

Forestry mulcher for mini excavator THFB/A

The THFB/A series is the entry-level Ferri forestry version for mini excavators. It is intended for users who need a compact yet efficient solution for more demanding maintenance of overgrown areas and work on terrain where a more aggressive cut is required than with standard maintenance mulchers.

• Recommended excavator weight: 3.5 – 6.0 t
• Models: THFB/A 70 and THFB/A 90
• Working widths: 0.70 m and 0.90 m
• Head weight: 285 – 380 kg
• Oil flow: 22 – 40 l/min
• Max. pressure: 230 bar
• Cutting tools: fixed teeth with tungsten reinforcements
• Max. material diameter: up to Ø 10 cm

Forestry mulcher for excavator THFS/R / THFS/A

The THFS series is designed for professional forestry mulching with medium-class excavators. Two versions are available, allowing the machine to be adapted to the desired working method, vegetation type and frequency of use in demanding environments.

• Recommended excavator weight: 5.0 – 9.0 t
• Models with R rotor: THFS/R 80 and THFS/R 100
• Models with A rotor: THFS/A 80 and THFS/A 100
• Working widths: 0.80 m and 1.00 m
• Weight: 380 – 505 kg
• Oil flow: 50 – 90 l/min
• Max. pressure: 250 bar
• R version: rotor with bidirectional hammers
• A version: Apeiron rotor with fixed teeth with tungsten reinforcements
• Max. material diameter with R version: up to Ø 10 cm
• Max. material diameter with A version: up to Ø 15 cm

Forestry mulcher for excavator THFL/R / THFL/A

The THFL series is engineered for more demanding forestry applications and longer professional use. It is intended for users who need a robust mulching head for reliable processing of dense vegetation and demanding terrain with excavators.

• Recommended excavator weight: 9.0 – 15.0 t
• Models with R rotor: THFL/R 105 and THFL/R 130
• Models with A rotor: THFL/A 105 and THFL/A 130
• Working widths: 1.05 m and 1.30 m
• Weight: 710 – 800 kg
• Oil flow: 90 – 100 l/min
• Max. pressure: 250 bar
• R version: rotor with hammers
• A version: Apeiron rotor with fixed teeth with tungsten reinforcements
• Max. material diameter with R version: up to Ø 15 cm
• Max. material diameter with A version: up to Ø 20 cm

Forestry mulcher for excavator THFM/F / THFM/A

The THFM series is intended for larger excavators and intensive work on demanding surfaces. It is used for tasks where high performance and reliable construction are important for professional land preparation, clearing overgrown areas and working in harsh conditions.

• Recommended excavator weight: 12.0 – 21.0 t
• Models with F rotor: THFM/F 130 and THFM/F 160
• Models with A rotor: THFM/A 130 and THFM/A 160
• Working widths: 1.30 m and 1.60 m
• Weight: 990 – 1,160 kg
• Oil flow: 120 – 130 l/min
• Max. pressure: 270 bar
• F version: rotor with fixed teeth with tungsten reinforcements
• A version: Apeiron rotor with fixed teeth with tungsten reinforcements
• Max. material diameter: up to Ø 30 cm

Forestry mulcher for heavy excavators THFP/F / THFP/A

The THFP series represents the most powerful class of Ferri forestry mulchers for heavy excavators. It is developed for the most demanding work, where loads are high, working conditions are severe and maximum performance in the range is required.

• Recommended excavator weight: over 20.0 t
• Models with F rotor: THFP/F 130 and THFP/F 160
• Models with A rotor: THFP/A 130 and THFP/A 160
• Working widths: 1.30 m and 1.60 m
• Weight: 1,380 – 1,600 kg
• Oil flow: 170 – 180 l/min
• Max. pressure: 330 bar
• F version: rotor with fixed teeth with tungsten reinforcements
• A version: Apeiron rotor with fixed teeth with tungsten reinforcements
• Max. material diameter: up to Ø 40 cm

Rotors and cutting tools

The correct choice of rotor and cutting tools has a major impact on mulching efficiency, machine load and final working result. Lighter versions are suitable for regular green area maintenance, while more demanding forestry versions are intended for intensive work with woody vegetation.

• Y-flails: for grass, light brush and regular green area maintenance
• Multi-purpose blades: for grass, brush, reeds, branches and light woody vegetation
• Hammers: for brush, branches and more demanding mulching
• Fixed teeth with tungsten reinforcements: for forestry work and thicker woody vegetation
• Apeiron rotor: for more even tooth penetration into the material and more efficient mulching in demanding applications

Advantages of Ferri excavator mulchers

• Wide selection of models for mini excavators, medium excavators and heavy excavators
• Solutions for municipal, construction and forestry use
• Rotor selection according to vegetation type
• Models for grass, brush, undergrowth, branches and woody vegetation
• Robust construction for professional use
• Suitable for maintaining slopes, roadside areas, waterways, forest roads and overgrown terrain

Need help choosing the right model?

We help you choose the right model according to excavator weight, hydraulic oil flow, attachment type and intended use. Based on your machine, we prepare the recommended Ferri mulcher configuration for optimal performance and long service life.

The post Excavator mulchers appeared first on Riko Ribnica.

Mulchers for skid steers and backhoes Ferri are designed for professional use on mini loaders, skid steer loaders, backhoe loaders and other working machines. The range includes solutions for municipal maintenance, construction work, clearing overgrown areas, slope maintenance and more demanding mulching of woody vegetation.

Hydraulic and forestry mulchers are available, enabling efficient mowing of grass, brush, undergrowth, branches and denser vegetation. The correct model selection depends on the type of working machine, hydraulic flow, working conditions and the material to be mulched.

Quick model selection by working machine and application

• TSKID: hydraulic mulcher for mini loaders and skid steer loaders from 55 to 100 HP
• TSKQ/F: forestry mulcher for mini loaders with fixed-tooth rotor for more demanding mulching
• TSKQ/A: forestry mulcher for mini loaders with Apeiron rotor for intensive work with woody vegetation
• TST: hydraulic arm-mounted mulcher for backhoe loaders and articulated loaders with working arm for greater reach

Hydraulic mulchers for skid steers

Hydraulic mulchers for skid steers and loaders are designed for users who need a powerful and adaptable attachment for daily surface maintenance. They are suitable for municipal companies, road maintenance contractors, construction companies, landscaping contractors and other professional users working on different terrains.

Mulcher for skid steer loader TSKID

The TSKID model is a hydraulic mulcher for mini loaders and skid steer loaders. It is designed for mowing grass, mulching brush, undergrowth and light woody vegetation. Thanks to its robust construction and universal attachment, it is suitable for a wide range of municipal, construction and maintenance work.

• Carrier machine: mini loader or skid steer loader
• Recommended power: 55 – 100 HP
• Models: TSKID 180 and TSKID 200
• Working widths: 1.80 m and 2.00 m
• Head weight: 748 – 780 kg
• Oil flow: 65 – 95 l/min
• Cutting tools: hammers for grass, brush and light vegetation
• Max. material diameter: up to Ø 5 cm
• Application: grass, brush, undergrowth, road edges, slopes and municipal maintenance

Forestry mulcher for skid steer loader TSKQ/F and TSKQ/A

The TSKQ series is designed for more demanding mulching with mini loaders and skid steer loaders. These are robust forestry mulchers for users who need higher performance when clearing overgrown areas, removing brush, undergrowth and woody vegetation.

Two rotor versions are available. The TSKQ/F version uses a fixed-tooth rotor, while the TSKQ/A version uses the Apeiron rotor, designed for more even tooth penetration into the material and more efficient mulching in demanding applications.

• Carrier machine: mini loader or skid steer loader
• Recommended power: 70 – 120 HP
• Models: TSKQ/F 160, TSKQ/F 180, TSKQ/A 160 and TSKQ/A 180
• Working widths: 1.60 m and 1.80 m
• Head weight: 1,020 – 1,100 kg
• Oil flow: 80 – 150 l/min
• TSKQ/F version: rotor with fixed teeth with tungsten reinforcements
• TSKQ/A version: Apeiron rotor with fixed teeth with tungsten reinforcements
• Max. material diameter: up to Ø 20 cm
• Application: brush, undergrowth, branches, overgrown terrain and woody vegetation

Arm-mounted hydraulic mulcher for backhoe and articulated loader TST

The TST model is a hydraulic mulcher with working arm for backhoes, backhoe loaders and articulated loaders. It is intended for users who need greater side or horizontal reach when mowing and maintaining areas along roads, channels, slopes, fences and other hard-to-reach locations.

• Carrier machine: backhoe loader or articulated loader
• Model: TST50A
• Mulcher working width: 1.20 m
• Max. horizontal reach: 5.04 m
• Weight: 920 kg
• Oil flow: 80 – 100 l/min
• Max. pressure: 220 bar
• Max. material diameter: up to Ø 3 cm
• Application: mowing along roads, slopes, channels, fences and hard-to-reach areas

Thanks to the working arm design, it is suitable for applications where a standard front-mounted mulcher on a loader does not provide the correct working position.

Advantages of Ferri mulchers for skid steers and backhoes

• Solutions for mini loaders, skid steer loaders, backhoes and articulated loaders
• Models for municipal, construction and more demanding forestry use
• Suitable for mowing grass, brush, undergrowth, branches and woody vegetation
• Choice between hydraulic and forestry versions
• Universal attachment for skid steer loaders on selected models
• Robust construction for professional use
• Suitable for maintaining road edges, slopes, construction sites, overgrown terrain and municipal areas

Need help choosing the right model?

We help you choose the right mulcher according to the type of working machine, power, hydraulic flow, attachment type and intended use. Based on your skid steer, loader or backhoe, we prepare the recommended Ferri mulcher configuration for optimal performance and long service life.

The post Mulchers for skid steers and backhoes appeared first on Riko Ribnica.

Key advantages of the iCUT remote-controlled robotic mulcher

• Designed for hard-to-reach, steep and overgrown terrain
• Enhanced operator safety through remote control operation
• Low center of gravity for stable operation on slopes and challenging surfaces

Features

The iCUT remote-controlled robotic mulcher is a professional solution for slope mulching, mowing steep embankments, roadside vegetation maintenance and operation in hard-to-access areas. The iCUT 3.4 model, powered by a 40 hp, and the iCUT 3.6 model, powered, combine high performance, stability and safe remote control operation, making them ideal for municipalities, road maintenance contractors, infrastructure maintenance companies and professional vegetation management on slopes, green areas and demanding terrain.

Remote control operation

Operator safety is one of the key advantages of the iCUT remote-controlled robotic mulcher. The remote control unit, with an operating range of up to 150–200 m, allows safe operation from a distance and reduces operator exposure to noise, exhaust gases, vibrations and flying debris such as vegetation or stones. This is particularly important when working on steep slopes, riverbanks, embankments, channels and other difficult-to-access locations.

Two control joysticks provide precise control of travel direction, machine movement and working head position. The ergonomic controller allows machine start-up, speed adjustment, steering sensitivity settings and precise operation according to working conditions and user requirements.

The control console includes numerous machine monitoring functions: emergency stop button, coolant and oil temperature indicators, remote control battery status, engine oil pressure monitoring, fuel level indicator, air filter restriction indicator, floating system activation, transport or working speed selection and activation of the self-cleaning fan.

Stage V engine

The iCUT is powered by a 4-stroke, liquid-cooled turbo diesel engine designed for professional use in demanding operating conditions. The engines comply with Stage V emission standards, ensuring efficient operation, reduced emissions and reliable daily performance.

Cooling is provided by the reliable FLEXXAIRE system with controlled reversible fan blades. The system helps keep the radiator clean, improves cooling efficiency, supports optimum engine performance and contributes to lower fuel consumption.

Diagnostics

The diagnostic system of the iCUT remote-controlled robotic mulcher automatically detects faults and immediately displays corrective actions. For additional support, a Murphy Chart monitoring device is fitted as standard, providing a comprehensive overview of powertrain diagnostic information.

This allows the operator to quickly identify potential issues and select the most appropriate solution. The large display provides a clear overview of all essential operating parameters of the iCUT machine.

Mulcher for slopes and steep terrain

The iCUT remote-controlled robotic mulcher is designed for safe operation in demanding environments where slopes can reach up to 55° in any direction. Exceptional stability is achieved through a low centre of gravity, advanced machine design and various track options that provide excellent traction on different surfaces.

In demanding conditions where additional stability and safety are required, the undercarriage can be hydraulically widened to increase the overall track width.

When increased ground traction is required, the operator can adjust the track width from 132 cm to 167 cm directly from the remote control. The process is quick, simple and can be completed within seconds.

Automatic track tensioning system

The automatic track tensioning system ensures that the tracks always operate with the correct tension specified by FERRI. The system simplifies track maintenance and replacement while contributing to longer track life and increased durability of other machine components.

The system consists of a hydraulic valve assembly that ensures reliable operation even under the most demanding working conditions.

Tracks for the remote-controlled robotic mulcher

Three different track types are available to ensure safe, efficient and stable operation in various terrain conditions:

EXTREME

Rubber tracks with a deep tread pattern are suitable for operation on moderately steep slopes. They provide excellent traction while minimizing damage to grass-covered surfaces.

GRIP

Rubber tracks with steel studs provide enhanced traction on rocky, uneven or demanding terrain where standard rubber tracks may be more susceptible to damage.

GRIP PLUS

Tracks equipped with steel cleats and studs are designed for extreme operating conditions where maximum traction, durability and reliable performance are required on steep slopes and challenging terrain.

iCUT front arm suspension system

The advanced hydro-pneumatic floating system is the result of years of development and enables the use of attachments of different weights and dimensions while maintaining optimal balance between the machine and the implement. In practice, the system allows the attachment to accurately follow ground contours, reduce friction and prevent harmful stress on the machine structure.

Mulching heads

R1300 and RH1600 hydraulic mulching heads

The grass mulching head equipped with Y blades is available in two working widths, 1.3 m and 1.6 m, providing increased productivity when maintaining green areas. It is recommended for mowing grass, weeds, undergrowth and shrubs.

RF-R 1300 hydraulic forestry mulching head

The RF-R forestry mulcher features an improved design that provides a robust structure, increased durability and enhanced impact resistance. The head can be equipped with rotors featuring different cutting tools, including single-sided hammers, double-sided hammers or fixed teeth for the most demanding forestry applications. The reinforced housing and the use of DOMEX 700 steel for the internal subframe result in a lightweight yet exceptionally strong and durable construction.

Attachments for the iCUT remote-controlled robotic mulcher

The iCUT remote-controlled robotic mulcher maximizes equipment utilization and enables year-round operation. Thanks to a wide range of attachments, the machine is suitable for forestry, maintenance of public and private green areas, landscaping, winter road maintenance and material handling applications.

CEJN Multi-X quick couplings

Optional CEJN Multi-X hydraulic quick couplings enable significantly faster attachment connection and disconnection. The system combines multiple hydraulic lines into a single connection, allowing safe, simple and efficient operation with a single coupling action. This solution reduces attachment changeover time, minimizes the risk of incorrect connections and increases overall productivity.

CEJN Multi-X couplings are particularly suitable for operators who frequently switch between different attachments, enabling rapid sequential use of multiple implements without unnecessary downtime.

Side-shift system

The side-shift kit is available as an optional feature for the R1300 mowing head. With a lateral movement range of 20 + 20 cm, it enables efficient operation in areas that would otherwise be difficult to reach, such as riverbanks, drainage channels, road edges and other confined locations.

Additional equipment

For even greater safety and versatility, the iCUT remote-controlled robotic mulcher can be equipped with additional options such as a ROLL BAR, FLASHING BEACON and HEADLIGHTS kit.

The Roll Bar provides additional machine protection when operating on demanding terrain and near obstacles. The flashing beacon improves machine visibility and increases safety when working alongside roads, on construction sites and in other high-traffic environments. The LED headlights kit ensures effective illumination of the work area and enables safe operation in low-light conditions or during early morning and evening work.

Additional equipment improves safety, visibility and machine versatility, allowing even more efficient operation in all weather and terrain conditions.

The post iCUT Remote-controlled robotic mulcher appeared first on Riko Ribnica.

Main advantages

• Excellent visibility from the vehicle cabin
• Comfort and safety
• Multipurpose use

Description

The range of ILF self-propelled hydrostatic machines was designed primarily for the professional care of large areas, such as cleaning roadside banks and maintenance of water networks. These machines are equipped with stable telescopic arms with working distances between 5.5 and 17 meters, on which it is possible to install various professional equipment for the care of road and river greens, melioration of green and forest areas, clearing snow on roads, earthworks and railway services.

Selection of professional attachments

1 – Cutting head | 2 – Conveyor head | 3 – Forestry head

4 – Saw bar | 5 – Cutter bar | 6 – Power shears

7 – Iron brush | 8 – Stump grinder | 9 – Pruning scissors

10 – Trunk pliers | 11 – Orange peel grapple | 12 – Grass grab

13 – Device for mowing rivers | 14 – Ditch bucket | 15 – Ditch cleaner

16 – Blower | 17, 18 – Barrier mower

Hydrostatic machine ILF ASPEN

ILF Aspen is a professional brushcutter machine suitable for working on green and forestry maintenance all year long. On the front side, this self-propelled hydrostatic machine is equipped with a sturdy telescopic arm of 7 or 6 meters, ideal for overcoming obstacles while cleaning roads edges, but also for working in the distance, even vertically.

ILF Aspen offers a high level of comfort for the operator and an excellent working visibility, thanks to its large glass window.

Multifunction hydrostatic machine ILF KOMMUNAL

ILF KOMMUNAL is a multifunction self-propelled machine equipped with a front quick coupling system that allows the installation of multiple equipments for green maintenance, construction work and multi-season roads maintenance. Thanks to the fixed cabin and the front-mounted equipment, the operator can enjoy maximum visibility and comfort while working. In addition to the tool setted on the front side, it is possible to arrange different configurations to manage equipments also on the back side.

The exclusive Energreen quick change design for ILF Kommunal has been inspired by the opportunity for a single operator to hook the attachment in complete autonomy. The system is smart: align the machine with the attachment, insert the guides, block the unit through the hydraulic hook device, connect all hydraulic circuits with only one plate.

Hydrostatic machine with multifunction arm ILF ALPHA

The ILF APLHA is a high-tech machine with a telescopic arm that ensures high performance, safety and work flexibility.

Born from an award-winning project appreciated by the most important costumers of the green maintenance sector, ILF ALPHA inherits all the features that have made unique this tool-carrier machine with telescopic arm: visibility, multifunctionality, ability, performance etc. ILF Alpha can be equipped with 3 different types of arm with different lengths which have various equipment.

ILF Alpha has a comfortable and spacious cabin, equipped with a large windscreen which allows the operator to have an efficient and total view of the work, keeping a high level of comfort and physical wellness.

In terms of safety, the cabin is certified by FOPS-ROPS tests: anti-tipping, against the risk of falling objects, soundproofed, provided with an efficient cooling system, and equipped with all that features necessary to assure the operator a safe and comfortable working environment.

The rotation of the cab allows the operator to cut the grass on both directions,
without rotating the machine and saving time. The rotating cabin allows the operator to always keep the correct body posture, avoiding stress and backpain or stiff neck, as well as managing the work with great comfort and care.

Professional hydrostatic machine ILF ATHENA

ILF ATHENA is a professional highway brushcutter machine which, thanks to its innovative technological contents, offers unparalleled performance, great flexibility and operational safety.

The machine is equipped with a 15-meter telescopic arm, where in addition to the classic mulching head, it is possible to apply several tools.
On the front side of the machine it is possible to set a PTO lifter or a DIN plate, in order to apply a front accessory that can be used simultaneously with the brush cutter arm.

The professional brushcutter ILF Athena is the right choice for every application and represents an European high technological product in the market of the green maintenance thanks to its technological innovations, excellent work performances, operative versatility and safety. ILF Athena has been designed to satisfy every needs; indeed it is possible to chose not only the lengh and type of arm but also engine power and among different options.

Highly professional hydrostatic machine ILF B2000

Energreen ILF B2000 is a highly professional telescopic brushcutter machine that, thanks to its innovative technology and excellent performance, is the best solution on the market for green maintenance and care, mainly on large rivers and large green areas. It can be equipped with a sturdy 9.5 or 17 meter telescopic arm which, in addition to the classic mowing and mulching head, allows you to use a variety of devices. The four twin wheels with three steering solutions offer the machine remarkable driving, even on muddy and heavy grounds.

This excellent result was obtained by Energreen through a deep break-up from the traditional philosophy of the machinery development industry, based mainly on the adaptation and modification of the agricultural tractors or wheeled excavators. The Energreen ILF B2000 machine is designed to overcome the limitations deriving from the use of the traditional tractors, or excavators, equipped with booms to work the maintenance of green areas along roads, motorways and channels with the maximum productivity and safety.

The post ILF Hydrostatic machines appeared first on Riko Ribnica.

Self-propelled robotic mulchers RoboEVO and RoboFIFTI offer an optimal balance between power and weight. This allows efficient operation in various terrain conditions. They represent a professional choice for users needing reliable and versatile machines for different purposes, ranging from general landscaping to forestry work, making them stand out in every application field.

The ability to use a wide range of tools with an advanced quick coupling system, allowing the replacement of more than 20 different attachments in a very short time. This enables quick and easy adaptation of the machine for various tasks, increasing productivity and work efficiency.

Among the various attachments are mulcher heads, mowers, grabbers, plows, tillers, and many others, allowing users to choose the appropriate equipment for specific tasks. The quick coupling system ensures easy and seamless attachment replacement, allowing for quick transitions between different tasks.

With this system, the use of RoboEVO and RoboFIFTI is even more practical and user-friendly, allowing easy machine adjustment according to specific work requirements, whether it’s mulching or any other task.

RoboEVO and RoboFIFTI are designed to operate safely in hazardous areas, where slopes can be up to 55° in any direction. Their exceptional stability is due to a low center of gravity and different types of rubber tracks, providing excellent traction on the terrain. This design allows the machine to move and operate efficiently in extreme terrain conditions.

Operator safety is a key priority when working with these machines. A remote control with a range of up to 150 m reduces risks for operators, including exposure to noise, exhaust emissions, and vegetation debris. This provides a comfortable and safe working experience in various environments, from hillsides to riverbanks.

RoboEVO continues the evolution path of the popular RoboGREEN model, while RoboFIFTI is the pinnacle of technological innovation, combining safety, performance, and flexibility for efficient fieldwork. Both machines represent an area of use where operator safety is paramount.

Discover Energreen Remote Mulchers – Power and Flexibility for Every Work Environment

Energreen offers a diverse range of remote-controlled mulchers designed for various challenges, with power ranging from 40 to 100 HP. Whether it’s working in narrow areas, tackling difficult terrains, or managing forests.

UNIVERSAL REMOTE CONTROLLED MULCHERS

The universal machines RoboEVO and RoboFIFTI with power ranging from 40 to 50 horsepower are ideal choices for various terrains and tasks. With their adaptability, you will handle every challenge.

FORESTRY REMOTE CONTROLLED MULCHERS

RoboMAX with 75 horsepower and RoboPLUS with 100 horsepower are your reliable partners for forestry work. With their robust construction and high performance, you will tackle the most demanding tasks.

The post Self-propelled robotic mulcher RoboEVO & RoboFIFTI appeared first on Riko Ribnica.

The ultimate power and versatility of premium machines, RoboMAX and RoboPLUS, are demonstrated through exceptional functionalities and a special design of various tracks, enabling efficient work on the most demanding terrains, including slopes up to 55°. Thanks to the combination of power, performance, and robustness, these machines are unrivaled in their class. Both machines can mulch branches up to 12 cm in diameter and are equipped with a forestry winch (optional), further increasing their versatility and usability in the field.

Operator safety is a key priority when working with these machines. A remote control with a range of up to 150 m reduces risks for operators, including exposure to noise, exhaust emissions, and vegetation debris. This enables a comfortable and safe working experience in various environments, from hillsides to riverbanks.

RoboMAX is a robust forestry mulcher that can be easily used for various tasks and works. Standard equipment includes two hydraulic double-acting functions. Designed to meet a variety of needs, the Energreen RoboMAX can be defined as a multi-purpose machine, operated remotely, with power and performance comparable to a traditional tractor with multiple attachments. The main features that stand out and distinguish this machine from other robots are power, reliability, strength, high performance, versatility, and a strong YANMAR diesel engine with 75 HP.

RoboPLUS represents an excellent solution for challenging forestry tasks. With a powerful DEUTZ diesel engine with 100 HP, this remote-controlled mulcher is an indispensable tool in the field. Capable of operating in narrow areas, on slopes, and in hard-to-reach areas, it ensures high performance and efficiency in every task.

Discover Energreen Remote Mulchers – Power and Flexibility for Every Work Environment

Energreen offers a diverse range of remote-controlled mulchers designed for various challenges, with power ranging from 40 to 100 HP. Whether it’s working in narrow areas, tackling difficult terrains, or managing forests.

UNIVERSAL REMOTE CONTROLLED MULCHERS

The universal machines RoboEVO and RoboFIFTI with power ranging from 40 to 50 horsepower are ideal choices for various terrains and tasks. With their adaptability, you will handle every challenge.

FORESTRY REMOTE CONTROLLED MULCHERS

RoboMAX with 75 horsepower and RoboPLUS with 100 horsepower are your reliable partners for forestry work. With their robust construction and high performance, you will tackle the most demanding tasks.

The post Self-propelled forestry mulcher RoboMAX & RoboPLUS appeared first on Riko Ribnica.

Professional hydraulic branch cutter for fast, safe and precise branch pruning. An ideal solution for maintaining roadside verges, tree-lined roads, parks and other green areas.

The RIKO RV hydraulic branch cutter is a professional attachment designed for efficient pruning of trees, shrubs and other woody vegetation. The powerful cutting mechanism enables fast, safe and precise cutting of branches up to 100 mm in diameter, ensuring reliable performance even during intensive daily use.

The attachment is designed for mounting on RIKO Ribnica telescopic mower arms as well as hydraulic telescopic arms from other manufacturers.

Main advantages

• Cuts branches up to 100 mm in diameter
• Robust construction for professional use
• Protected cutting mechanism against damage
• Quick and easy installation
• Simple servicing and maintenance

Applications

• Roadside tree maintenance
• Branch pruning along roads and cycle paths
• Maintenance of parks and public green areas
• Forest edge maintenance
• Removal of overgrown vegetation
• Municipal and contractor operations

Robust construction

The heavy-duty housing effectively protects the cutting mechanism from impacts and damage during operation. The attachment is engineered for a long service life, reliable performance and minimal maintenance requirements, even in demanding working conditions.

Drive and operation

The hydraulic branch cutter is powered by the carrier machine’s hydraulic system. It is operated directly from the vehicle cab, providing safe, precise and efficient operation without the operator leaving the vehicle.

Technical specifications

• Maximum cutting diameter: up to 100 mm
• Drive: Hydraulic
• Operation: From the vehicle cab

The post RV Hydraulic branch cutter appeared first on Riko Ribnica.

• Reliability
• Simple operation
• Wide range of usage

Installation and mounting options

In addition to standard fixing plates and a three-point hitch, we also offer an option for installation on various types of vehicles or working machines.

Characteristics

The device is designed for hammering and extracting carrier pillars of safety fencing. By installing a suitable tool – a drill or a tip, holes can be made to install PVC and wooden roadside signposting bollards. The drill can drill holes of up to 300 mm in diameter and a depth of 1000 mm. The device is controlled by a portable control panel outside the danger area of the operating device.

The post NPO Fence repair device appeared first on Riko Ribnica.

Main advantages

• Long service life
• Simple operation
• Simple servicing

Characteristics

The six-shovel orange peel grapple made of resistant materials is suitable for the loading of chips, waste, stone and similar bulk materials. Two connections are required to work with the polyp – the crane-rotator and the rotator-polyp and only one connection is required when turning manually.

The post P-3M Orange peel grapple appeared first on Riko Ribnica.

Main advantages

• Long service life
• Easy operation
• Precise and uniform application of bitumen emulsion
• Quick and easy system cleaning
• Compact and mobile design

Description

The MB 200 bitumen sprayer is a professional mobile unit designed for the application of bitumen emulsion during asphalt maintenance and road repair. It is suitable for repairing damaged asphalt surfaces and cracks, preparing the surface before asphalt paving, and constructing new asphalt surfaces.

The operating principle is based on pumping bitumen emulsion from a standard drum mounted together with the spraying unit on a mobile transport trolley. During operation, the emulsion is preheated and delivered through a high-pressure hose to a manually operated spray nozzle.

The continuously adjustable spray cone allows precise control of the spray width and application rate according to the specific job requirements, ensuring uniform application of the bitumen emulsion and efficient material consumption.

The unit is powered by a reliable air-cooled RATO R210 petrol engine with an output of 7 HP, providing dependable performance even under intensive professional use. After operation, the system can be quickly and easily cleaned by flushing with diesel fuel, reducing preparation time for the next use and extending the service life of the equipment.

Applications

• Asphalt surface maintenance
• Repair of damaged asphalt
• Crack sealing
• Surface preparation before asphalt paving
• Construction of new asphalt surfaces
• Maintenance of roads, car parks and other traffic areas
• Municipal and road maintenance works

The post MB 200 Bitumen sprayer appeared first on Riko Ribnica.

• Simple servicing
• Simple operation
• Wide range of usage

Characteristics

The multi-purpose hydraulic arm is a universal device intended for cleaning roadside markings and fences, and sweeping. Depending on the purpose of cleaning, simply replace the working implement. The reach of the lever with the tool is 3.5 metres horizontally in the range of 270° and 3.2 metres vertically. The machine is operated from the vehicle’s cabin.

Installation and mounting options

In addition to standard fixing plates and a three-point hitch, we also offer an option for installation on various types of vehicles or working machines. The hydraulic arm is connected to the vehicle equipped with a hydraulic device and a water tank.

The post HRV Hydraulic arm appeared first on Riko Ribnica.

Description

Renowned Borum line marking machines cover all types of line marking jobs on the road and runways. Each machine size comes with an extended wide variety of application equipment and capacities covering any possible requirement.

Machines are divided into

After the material is applied:

•  Cold paint
•  Two-component paint
•  Thermoplastic
•  Thermo & cold

By application method:

•  Spraying
•  Extrusion
•  Rib lines
•  Dots
•  Agglomerate

By type:

•  Hand guided
•  Trucks
•  Self-propelled

By domain:

•  City
•  Main roads
•  Motorway
•  Airport

The post Road marking machines appeared first on Riko Ribnica.

Main Advantages

• Mobile and trailer versions
• High cleaning performance
• Available with hot water options

Features

High-pressure mobile washers are designed for professional use in municipal services, construction, agriculture, and industry. The range includes trailers with high-pressure systems for hot or cold water, mobile units for vehicles, and hydraulic washers for attachment to work machines.
These systems enable efficient removal of dirt, sand, salt, oil stains, and other stubborn residues from various surfaces such as streets, sidewalks, traffic signs, trucks, and machines.

These high-pressure mobile washers provide a reliable solution for professional cleaning of roads, urban areas, and work machines. With various models – Jet-It, TowJet-It, and Jet-It hydraulic system – they cover a wide range of needs in municipal services, industry, and infrastructure maintenance.

Jet-It mobile highpressure washer

Jet-It is a compact, mobile high-pressure washer that can be mounted in a pickup or other vehicle. It is equipped with a powerful pump, a water tank up to 1000 L, and an engine (gasoline or diesel). The system is ready for immediate field use. Suitable for cleaning in urban areas, parks, industrial zones, and any locations where mobility and efficiency are crucial.

TowJet-It – Trailer high-pressure washer with hot water

TowJet-It is a trailer with an independent high-pressure hot water unit. Models are available with a diesel water heater and gasoline or diesel engine. The integrated water tank with a capacity of up to 1000 L allows fully independent operation without connection to an external source.
Suitable for removing stubborn dirt, ice, chewing gum, oil stains, and similar. TowJet-It is an ideal solution for municipalities, road maintenance, and construction companies.

Hydraulic high-pressure washer

The hydraulic high-pressure washer is designed for mounting on work machines such as tractors, loaders, and municipal vehicles. It is powered directly from the machine’s hydraulic system, enabling efficient cleaning without an additional engine or fuel.
Available in various power levels and configurations, with optional accessories such as different nozzles, hose reels, and tool holders.

Reliable performance in all conditions

Regardless of terrain or season, high-pressure cleaning systems provide reliable performance and effective cleaning. Their robust construction and adaptability ensure long-lasting use even in the most demanding conditions.

The post Jet-It mobile highpressure washer appeared first on Riko Ribnica.

Hilltip WeedStriker is a professional device for environmentally friendly weed removal using hot water, designed for mounting on pickup vehicles, trailers, tractors, or similar work vehicles. Available in two versions – WeedStriker 350 and WeedStriker 500 – it enables efficient and safe elimination of weeds on sidewalks, driveways, curbs, and other urban surfaces.

Eco-friendly weed elimination without chemicals

The system uses hot water heated to 98 °C, which penetrates the weed roots and destroys them without the use of pesticides or other chemicals. Surfaces are immediately safe to use after treatment, making it ideal for municipalities, public service companies, and maintenance teams.

Reliable system for professional use

Hilltip WeedStriker includes a fuel-powered boiler with a two-stage pump to maintain constant temperature and a 12V water pump powered by batteries. The system allows for hours of continuous operation. Smart connectivity with the StrikeSmart app is also available, enabling control and tracking via the HTrack system.

Models and dimensions

WeedStriker 350 has a tank capacity of 350 liters, width of 106 cm, height of 83 cm, length of 124 cm, pressure of 4 bar, and water flow of 4–8 liters per minute. Power supply is 12V electric, and empty weight is 200 kg.

WeedStriker 500 features a 500-liter tank, same width of 106 cm, height of 105 cm, and length of 140 cm. Pressure and flow remain the same as the 350 model. Power supply is also 12V electric, with an empty weight of 205 kg.

Why choose Hilltip WeedStriker

• Eco-friendly weed removal without chemicals
• Suitable for municipalities, public service companies, and private users
• Fast operation and easy to use
• Long-lasting effectiveness
• Connectivity with the StrikeSmart™ app and HTrack system

The post WeedStriker Mobile weed remover appeared first on Riko Ribnica.

Description

TTMA (Towed Truck Mounted Attenuators) are mobile collision mitigation systems. TTMA with a signal board is used as a safety element in road traffic to reduce the consequences of traffic accidents and prevent injuries or reduce their severity on roads categorized as motorways (AC) and expressways (HC).

The TTMA is a Level 3 Crash Test Protective Cushion (TL-3) designed for use with a support truck in stationary and moving work areas on roads. The TTMA is one of the most advanced collision absorbers on the market, providing a high level of performance when used with heavy-duty towing vehicles and at the same time requiring no modification of the towing vehicle.

Mode of operation of TTMA shock absorbers

TTMA uses patented tube bursting technology to distribute energy from the vehicle that causes a collision. When a pointed reel with a square cross-section is pushed into a square tube with smaller internal dimensions, the reel is pressed against the sides of the tube. External forces acting inside the pipe concentrate the pressure on the corners and thus create a controlled cracking of the steel. As the reel continues, the tube splits into four flat metal strips that the extended part of the reel folds outward.

Additional safety with TTMA technology is the fact that it can rotate. Competitive truck shock absorbers use swivel restraint systems that prevent the shock absorber from rotating, and the TTMA allows the trailer to do so. With this technology, the system is constantly aligned with the vehicle causing the collision, which increases the energy distribution. Due to the aforementioned innovative approach to energy management, TTMA is the only system that has successfully passed the optional deviation tests and angular tests.

The post TTMA Safety signal trailer with shock absorbers appeared first on Riko Ribnica.