PVK Sweeping device
Professional sweeping device
Multiple surface cleaning methods for easy bulk removal.
Technical specifications
 Sweeping width |
2.3 m |
 Brush diameter |
0.6 m |
 Dustpan volume |
180 l |
 Drive system |
Hydraulic |
 Operation |
Driver |
 Turning |
0–30° |
 Tilt angle |
8+8° |
 Purpose of use |
Sweeping |
Main advantages
- Easy maintenance
- Weed removal and kerbside cleaning
- Dump material in the skip or over the edge of the carriageway
Characteristics
The PVK sweeper is designed to pick up and remove material (grit, sand, dust, etc.). Typical applications are asphalted or paved surfaces and pathways. In addition to sweeping the carriageway and pavement edge, the sweeper can also be used to clean drainage slopes at the edge of the carriageway and mulches.
The side brush is suitable for sweeping along road verges, buildings and all areas that cannot be accessed with the basic brush. The side brush allows the material to be swept to the left or right side, the advantage of this function is that you can clean the area over the edge of the carriageway and consequently reduce the emptying intervals of the dustbin. With different brush combinations, you can adapt the device to your needs (weed removal, cleaning of sensitive surfaces, etc.).
The PVK sweeper can be equipped with a wetting system to speed up the settling of dust that may rise during sweeping. Water spraying is carried out via a water pump and nozzles, and the tanks are mounted on the device or on the vehicle. The unit features easy maintenance and a quick brush change system.
Drive and control
Machine functions such as steering, brush drive, bin emptying and side brush drive are implemented via hydraulic control circuits of the carrier vehicle.
Installation and mounting options
The sweeper can be mounted on universal work vehicles of the Unimog type, tractor or construction machine (JCB, CAT, etc.).
Standard equipment
- Mounting plate (A/5 or B/3) or three-point mounting system
- Hydraulic installation
- Lateral surface adjustment
- Brush made of combination of PVC and wire brushes Φ600, infinitely adjustable pressure force on the substrate, left-right independently
- Transport guard
- Lifting levelling
- Support wheels
Additional equipment
- Quick mounting system for combined machines with controller
- Various adapters and mounting systems for mounting on vehicles
- LED signaling with dimensional flags
- Wetting system with spray nozzles (nozzle also on the side brush), pipes and connections
- Electric water pump
- Various water tanks (250 l, 1000 l, 4000 l), on the device or on the vehicle
- Side brush with its own hydraulic motor, adjustable (left/right, forward/backward) and protected against side impact
- Rotate the side brush to the left or right
- Rubber protection of the side brush
- Different types of side brushes – lamellar, rough, PVC, combinations
- Hopper for waste collection with wheels and hydraulic emptying
There are many other options available – please contact us for more information.
Service and
support
We are aware that only quick and professional assistance ensures efficient work with our products. Therefore, we pay great attention to after-sales cooperation. A well-equipped service department ensures that your work runs smoothly in all seasons. In winter, we provide you with 24-hour assistance and offer help even in the most difficult conditions.
Login to
Riko Portal
- Spare parts order
- All documents in one place
- Priority in orders
- Direct access to sales staff
